我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM 576GB (6x96GB) DDR5-5600 CL46 1.1V 2Rx4 ECC RDIMM Supermicro H13SRH memory upgrade

SKU CH-4EK4-YB1G5

A 576GB DDR5 ECC RDIMM kit of six 96GB modules running at 5600MHz with CL46 latency and 1.1V registered operation, validated for the Supermicro H13SRH motherboard

  • Capacity576GB (6 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Speed 5600MHz

  • 576 GB total capacity from six 96 GB modules for high-density server workloads
  • DDR5-5600 speed with CL46 latency at 1.1 V for rated performance
  • Registered ECC RDIMM architecture corrects single-bit errors and offloads the memory controller
  • 288-pin 2Rx4 form factor matches the Supermicro H13SRH motherboard requirements
  • Major OEM Samsung, Micron or Hynix chips deliver enterprise-grade reliability

Capacity and Compatibility

This 576GB kit contains six 96GB DDR5 RDIMM modules built for the Supermicro H13SRH motherboard. Registered ECC architecture and 2Rx4 organisation let the board run every slot at the rated 5600 MT/s speed without down-clocking. The exact voltage and timing match the platform's memory controller requirements for immediate recognition at full capacity.

Thermals and Power

Modules operate at 1.1V with no heat spreader, relying on the server chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller, helping keep system power draw stable when all six DIMMs are populated. Silent operation is inherent because no active cooling is attached to the sticks themselves.

Deciding Specification

The 288-pin DDR5 RDIMM form factor with CL46 latency and ECC is the single spec that determines fit; UDIMM, SODIMM or non-ECC modules will not work in this board. Buyers whose systems require a different pin count, voltage or rank configuration must select another kit.

商品特色

  • 576 GB total capacity from six 96 GB modules for high-density server workloads
  • DDR5-5600 speed with CL46 latency at 1.1 V for rated performance
  • Registered ECC RDIMM architecture corrects single-bit errors and offloads the memory controller
  • 288-pin 2Rx4 form factor matches the Supermicro H13SRH motherboard requirements
  • Major OEM Samsung, Micron or Hynix chips deliver enterprise-grade reliability

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K6
Capacity576GB (6 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content576GB 6X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

其他版本

同系列還有 5 款

同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

How do I install the six 96GB DDR5 RDIMMs into the Supermicro H13SRH, and which population step is most often missed?

Populate all six 288-pin slots following the motherboard manual's exact DIMM order; the step most often missed is verifying the approved population sequence for full 576GB capacity before powering on.

What maintenance or replacement will the 2Rx4 ECC registered modules need during their service life?

The modules have no heat spreader and no moving parts; maintenance is limited to keeping slot contacts clean and relying on on-die ECC to correct single-bit errors, with replacement only if a module fails.

What limit appears first when the 5600MHz CL46 kit runs sustained workloads at 1.1V?

The registered buffer and 2Rx4 organisation offload the memory controller, so the first sustained-use limit is the motherboard's maximum supported capacity and population rules rather than the memory kit itself.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。