NEMIX RAM 64GB DDR5 5600 CL46 2Rx4 1.1V ECC RDIMM GIGABYTE MS34-CP0 memory upgrade
- 64GB
- 288-Pin DDR5 RDIMM
NEMIX RAM
A 64GB DDR5 5600 ECC RDIMM kit with CL46 timing and 1.1V operation for Supermicro H13SRH servers
Size 64GB 2X32GB
Speed 5600MHz
This 64 GB kit contains two 32 GB DDR5-5600 registered ECC modules built for the Supermicro H13SRH motherboard. The 288-pin RDIMM form factor and registered architecture match the board's memory-controller requirements exactly. System integrators and IT teams deploying or upgrading that platform receive the precise rank, voltage and timing the firmware expects.
The modules run at 1.1 V with CL46 latency and a 2Rx8 rank layout, which is the single specification that determines whether the H13SRH will recognise full capacity and operate at the rated 5600 MT/s speed. Unbuffered UDIMMs or different rank configurations will not train correctly on this board, so the registered ECC design is the decisive compatibility factor.
Insert each module into the slots specified by the Supermicro H13SRH manual, following the approved population order for two DIMMs. The most common issue is populating the wrong slot pair or mixing ranks, which prevents the system from posting at full speed. Verify the board's memory-configuration rules before seating the kit.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-328K2 |
| Capacity | 64GB (2 x 32GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 64GB 2X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
其他版本
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
The kit runs at 5600 MT/s with CL46 latency at 1.10 V, delivering the exact speed and timing the board's memory controller expects for full-capacity operation.
Registered buffering offloads the memory controller so all slots can be fully populated, while ECC corrects single-bit errors on the fly to prevent silent data corruption.
They require 288-pin DDR5 RDIMM slots; the board must accept registered DIMMs, not UDIMM or SODIMM, and the population order should follow the manual.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?