BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00279855BTC
Διαθέσιμο
NEMIX RAM
NEMIX RAM 8GB (2x4GB) DDR3 1333 PC3-10600 2Rx8 1.35V 204-Pin SODIMM Kit POSIFLEX HC-1521 memory upgrade
DDR3 SODIMM kit adds 8 GB across two 4 GB modules at 1333 MHz for the POSIFLEX HC-1521 terminal
- Capacity8GB (2 x 4GB)
- SpeedDDR3 1333 (PC3 10600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.50V
- Designed for POSIFLEX HC-1521 infotainment terminals
- 8 GB kit (2 × 4 GB) DDR3 1333 MHz
- Low-voltage 1.35 V DDR3 SODIMM modules
- CL9 unbuffered non-ECC for stable operation
- Built with major OEM DRAM chips
POSIFLEX HC-1521 memory kit
This 8 GB DDR3 SODIMM kit contains two 4 GB modules built for the POSIFLEX HC-1521 21.5 inch touch terminal. It uses 204-pin unbuffered non-ECC memory rated at 1333 MHz PC3-10600 with CL9 latency. The kit targets businesses that need a direct replacement for the original memory in this point-of-sale system.
Check terminal memory slots
Before ordering confirm the HC-1521 has two free SODIMM slots or can accept a full 8 GB swap. The system runs DDR3 at 1.35 V low-voltage; mixing with 1.50 V modules may cause instability. Verify the current BIOS recognises 2Rx8 density modules to avoid a no-post situation.
Fits the kiosk chassis
The low-profile SODIMMs sit inside the sealed all-in-one enclosure without a heat spreader. Installation frees the single DIMM slot the terminal ships with for future expansion if the board supports it. No extra cables or adapters are required; the modules draw power directly from the slot.
Βασικά χαρακτηριστικά
- Designed for POSIFLEX HC-1521 infotainment terminals
- 8 GB kit (2 × 4 GB) DDR3 1333 MHz
- Low-voltage 1.35 V DDR3 SODIMM modules
- CL9 unbuffered non-ECC for stable operation
- Built with major OEM DRAM chips
Προδιαγραφές
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS10600-428K2 |
| Capacity | 8GB (2 x 4GB) |
| Speed | DDR3 1333 (PC3 10600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.50V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL9 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 8GB (2X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM KIT |
Ερωτήσεις για αυτό το προϊόν
Does the kit include both 4 GB SODIMMs or must the second module be purchased separately?
The package contains two 4 GB 204-pin DDR3 SODIMMs, giving 8 GB total in a single kit.
Should I choose the 1.35 V or 1.50 V version for the POSIFLEX HC-1521?
The modules are rated for 1.35 V operation and will also run at 1.50 V, matching the terminal's requirements.
Will the CL9 1333 MT/s rating deliver full speed once installed in the HC-1521?
The kit runs at DDR3-1333 with CL9 timing, the native speed supported by the POSIFLEX HC-1521 platform.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
