Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Two green 204-pin DDR3 SODIMM modules with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 8GB (2x4GB) DDR3 1333 PC3-10600 2Rx8 1.35V 204-Pin SODIMM Kit POSIFLEX HC-1521 memory upgrade

SKU CH-HDGJ-NCA1Z

DDR3 SODIMM kit adds 8 GB across two 4 GB modules at 1333 MHz for the POSIFLEX HC-1521 terminal

  • Capacity8GB (2 x 4GB)
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Designed for POSIFLEX HC-1521 infotainment terminals
  • 8 GB kit (2 × 4 GB) DDR3 1333 MHz
  • Low-voltage 1.35 V DDR3 SODIMM modules
  • CL9 unbuffered non-ECC for stable operation
  • Built with major OEM DRAM chips

POSIFLEX HC-1521 memory kit

This 8 GB DDR3 SODIMM kit contains two 4 GB modules built for the POSIFLEX HC-1521 21.5 inch touch terminal. It uses 204-pin unbuffered non-ECC memory rated at 1333 MHz PC3-10600 with CL9 latency. The kit targets businesses that need a direct replacement for the original memory in this point-of-sale system.

Check terminal memory slots

Before ordering confirm the HC-1521 has two free SODIMM slots or can accept a full 8 GB swap. The system runs DDR3 at 1.35 V low-voltage; mixing with 1.50 V modules may cause instability. Verify the current BIOS recognises 2Rx8 density modules to avoid a no-post situation.

Fits the kiosk chassis

The low-profile SODIMMs sit inside the sealed all-in-one enclosure without a heat spreader. Installation frees the single DIMM slot the terminal ships with for future expansion if the board supports it. No extra cables or adapters are required; the modules draw power directly from the slot.

Prednosti

  • Designed for POSIFLEX HC-1521 infotainment terminals
  • 8 GB kit (2 × 4 GB) DDR3 1333 MHz
  • Low-voltage 1.35 V DDR3 SODIMM modules
  • CL9 unbuffered non-ECC for stable operation
  • Built with major OEM DRAM chips

Špecifikácie

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K2
Capacity8GB (2 x 4GB)
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (2X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM KIT

Otázky k tomuto produktu

Does the kit include both 4 GB SODIMMs or must the second module be purchased separately?

The package contains two 4 GB 204-pin DDR3 SODIMMs, giving 8 GB total in a single kit.

Should I choose the 1.35 V or 1.50 V version for the POSIFLEX HC-1521?

The modules are rated for 1.35 V operation and will also run at 1.50 V, matching the terminal's requirements.

Will the CL9 1333 MT/s rating deliver full speed once installed in the HC-1521?

The kit runs at DDR3-1333 with CL9 timing, the native speed supported by the POSIFLEX HC-1521 platform.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.