BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00280417BTC
Διαθέσιμο
NEMIX RAM
NEMIX RAM 8GB DDR4 2133 PC4-17000 CL15 2Rx8 1.2V 260-Pin SODIMM POSIFLEX RT-5016E memory upgrade
8 GB DDR4-2133 SODIMM, CL15 at 1.2 V, 260-pin 2Rx8 module validated for POSIFLEX RT-5016E terminals
- Capacity8GB
- SpeedDDR4 2133 (PC4 17000)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 8GB capacity expands POS terminal multitasking headroom
- DDR4 2133 speed matches system memory bus
- CL15 latency supports responsive transaction processing
- 2V operation keeps power draw low
- 260-pin SODIMM fits POSIFLEX RT-5016E slot
POSIFLEX RT-5016E DDR4 SODIMM upgrade
This 8 GB DDR4 module is built specifically for the POSIFLEX RT-5016E terminal and installs in a 260-pin SODIMM slot. It runs at 2133 MT/s with a CL15 latency and operates at 1.20 V without ECC or buffering. The single stick adds 8 GB of system memory to the supported point-of-sale platform.
Suitable for POS terminal memory expansion
Technicians upgrading a POSIFLEX RT-5016E will find this module matches the required form factor, voltage and timing. Builders working on laptops, desktops or servers that need ECC, registered memory, a different pin count or a higher speed grade should look elsewhere.
2133 MT/s DDR4 speed grade
The module is rated at DDR4 2133 (PC4-17000) with CL15 latency, which is the exact speed the target terminal expects. If the system requires a faster or slower DDR4 grade, this stick will not meet the specification.
Βασικά χαρακτηριστικά
- 8GB capacity expands POS terminal multitasking headroom
- DDR4 2133 speed matches system memory bus
- CL15 latency supports responsive transaction processing
- 2V operation keeps power draw low
- 260-pin SODIMM fits POSIFLEX RT-5016E slot
Προδιαγραφές
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 2133MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS17000-828K1 |
| Capacity | 8GB |
| Speed | DDR4 2133 (PC4 17000) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL15 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR4 2133MHZ PC4-17000 2Rx8 1.2V CL15 260-PIN Non-ECC Unbuffered SODIMM |
Ερωτήσεις για αυτό το προϊόν
Will this 260-pin DDR4 2133 module work alongside existing PC4-17000 memory already installed in my POSIFLEX RT-5016E?
Yes, it matches the DDR4 2133 PC4-17000 specification and 1.2 V voltage, so it will run at the same speed and timing as identical modules already in the system.
How can I verify the module is running at CL15 2Rx8 after installation?
Open Task Manager or a hardware monitor and confirm the memory shows 2133 MT/s, CAS latency 15 and dual-rank (2Rx8) organisation.
Does the package include only the 8 GB SODIMM or are tools and brackets supplied?
The box contains the single 8 GB 260-pin SODIMM; no tools, brackets or additional cables are included.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
