Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Green circuit board with black memory chips, 260-pin SODIMM form factor

NEMIX RAM

NEMIX RAM 8GB DDR4 2133 PC4-17000 CL15 2Rx8 1.2V 260-Pin SODIMM POSIFLEX RT-5016E memory upgrade

SKU CH-R92D-K8NXW

8 GB DDR4-2133 SODIMM, CL15 at 1.2 V, 260-pin 2Rx8 module validated for POSIFLEX RT-5016E terminals

  • Capacity8GB
  • SpeedDDR4 2133 (PC4 17000)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8GB capacity expands POS terminal multitasking headroom
  • DDR4 2133 speed matches system memory bus
  • CL15 latency supports responsive transaction processing
  • 2V operation keeps power draw low
  • 260-pin SODIMM fits POSIFLEX RT-5016E slot

POSIFLEX RT-5016E DDR4 SODIMM upgrade

This 8 GB DDR4 module is built specifically for the POSIFLEX RT-5016E terminal and installs in a 260-pin SODIMM slot. It runs at 2133 MT/s with a CL15 latency and operates at 1.20 V without ECC or buffering. The single stick adds 8 GB of system memory to the supported point-of-sale platform.

Suitable for POS terminal memory expansion

Technicians upgrading a POSIFLEX RT-5016E will find this module matches the required form factor, voltage and timing. Builders working on laptops, desktops or servers that need ECC, registered memory, a different pin count or a higher speed grade should look elsewhere.

2133 MT/s DDR4 speed grade

The module is rated at DDR4 2133 (PC4-17000) with CL15 latency, which is the exact speed the target terminal expects. If the system requires a faster or slower DDR4 grade, this stick will not meet the specification.

Ciri-ciri utama

  • 8GB capacity expands POS terminal multitasking headroom
  • DDR4 2133 speed matches system memory bus
  • CL15 latency supports responsive transaction processing
  • 2V operation keeps power draw low
  • 260-pin SODIMM fits POSIFLEX RT-5016E slot

Spesifikasi

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2133MHZ Non-ECC Unbuffered SODIMM
Part NumberMS17000-828K1
Capacity8GB
SpeedDDR4 2133 (PC4 17000)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL15
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2133MHZ PC4-17000 2Rx8 1.2V CL15 260-PIN Non-ECC Unbuffered SODIMM

Soalan tentang produk ini

Will this 260-pin DDR4 2133 module work alongside existing PC4-17000 memory already installed in my POSIFLEX RT-5016E?

Yes, it matches the DDR4 2133 PC4-17000 specification and 1.2 V voltage, so it will run at the same speed and timing as identical modules already in the system.

How can I verify the module is running at CL15 2Rx8 after installation?

Open Task Manager or a hardware monitor and confirm the memory shows 2133 MT/s, CAS latency 15 and dual-rank (2Rx8) organisation.

Does the package include only the 8 GB SODIMM or are tools and brackets supplied?

The box contains the single 8 GB 260-pin SODIMM; no tools, brackets or additional cables are included.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.