Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

NEMIX RAM

NEMIX RAM 8GB DDR4 2133 SODIMM 1.2V CL15 2Rx8 POSIFLEX XT-6315 memory upgrade

SKU CH-VXA7-H646C

8 GB DDR4 SODIMM module running at 2133 MHz with CL15 latency and 1.2 V operation, built for the POSIFLEX XT-6315 terminal

  • Capacity8GB
  • SpeedDDR4 2133 (PC4 17000)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8 GB capacity expands POS terminal multitasking
  • DDR4 2133 speed matches system memory bus
  • 2 V low voltage reduces power draw
  • 260-pin SODIMM fits POSIFLEX XT-6315 slot
  • CL15 latency supports responsive transaction processing

System-Specific DDR4 SODIMM for POSIFLEX XT-6315

This 8 GB DDR4 2133 SODIMM is built for the POSIFLEX XT-6315 JIVA high-end fanless POS terminal with Celeron chipset. It targets technicians and system integrators who need a validated, non-ECC memory upgrade for that exact platform. The 260-pin unbuffered module installs without configuration changes.

8 GB single-rank headroom for typical POS workloads

One 8 GB module running at PC4-17000 speed provides enough capacity for standard retail, hospitality and kiosk applications on the target terminal. The single 2Rx8 stick leaves no free slot on a single-channel board, so expanding beyond 8 GB would require replacing the module entirely.

Low-voltage operation in a fanless chassis

Rated at 1.20 V with CL15 latency and no heat spreader, the module matches the thermal envelope of the original equipment in the passively cooled XT-6315. Power draw stays minimal under continuous load, and the lack of moving parts on the terminal means the memory adds no audible noise.

Βασικά χαρακτηριστικά

  • 8 GB capacity expands POS terminal multitasking
  • DDR4 2133 speed matches system memory bus
  • 2 V low voltage reduces power draw
  • 260-pin SODIMM fits POSIFLEX XT-6315 slot
  • CL15 latency supports responsive transaction processing

Προδιαγραφές

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2133MHZ Non-ECC Unbuffered SODIMM
Part NumberMS17000-828K1
Capacity8GB
SpeedDDR4 2133 (PC4 17000)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL15
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2133MHZ PC4-17000 2Rx8 1.2V CL15 260-PIN Non-ECC Unbuffered SODIMM

Ερωτήσεις για αυτό το προϊόν

Will this DDR4 2133 SODIMM run with the existing memory already installed in my POSIFLEX XT-6315?

The module is DDR4 2133 PC4-17000 CL15 1.2V unbuffered non-ECC. Match those specs on your current sticks for best compatibility.

How can I verify the 8GB module is recognised at the correct 2133 MT/s speed after installation?

Enter the BIOS or use a system information tool; the memory should report DDR4 2133 (PC4-17000) with CL15 timings at 1.2V.

Does the package include only the 260-pin SODIMM or are tools and brackets also supplied?

The box contains the single 8GB 260-pin DDR4 SODIMM; no tools, brackets or additional cables are included.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.