เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน

สินค้าที่ติดตาม เข้าสู่ระบบ

NEMIX RAM

NEMIX RAM 8GB DDR4 2133 SODIMM 1.2V CL15 2Rx8 POSIFLEX XT-6315 memory upgrade

SKU CH-VXA7-H646C

8 GB DDR4 SODIMM module running at 2133 MHz with CL15 latency and 1.2 V operation, built for the POSIFLEX XT-6315 terminal

  • Capacity8GB
  • SpeedDDR4 2133 (PC4 17000)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8 GB capacity expands POS terminal multitasking
  • DDR4 2133 speed matches system memory bus
  • 2 V low voltage reduces power draw
  • 260-pin SODIMM fits POSIFLEX XT-6315 slot
  • CL15 latency supports responsive transaction processing

System-Specific DDR4 SODIMM for POSIFLEX XT-6315

This 8 GB DDR4 2133 SODIMM is built for the POSIFLEX XT-6315 JIVA high-end fanless POS terminal with Celeron chipset. It targets technicians and system integrators who need a validated, non-ECC memory upgrade for that exact platform. The 260-pin unbuffered module installs without configuration changes.

8 GB single-rank headroom for typical POS workloads

One 8 GB module running at PC4-17000 speed provides enough capacity for standard retail, hospitality and kiosk applications on the target terminal. The single 2Rx8 stick leaves no free slot on a single-channel board, so expanding beyond 8 GB would require replacing the module entirely.

Low-voltage operation in a fanless chassis

Rated at 1.20 V with CL15 latency and no heat spreader, the module matches the thermal envelope of the original equipment in the passively cooled XT-6315. Power draw stays minimal under continuous load, and the lack of moving parts on the terminal means the memory adds no audible noise.

จุดเด่น

  • 8 GB capacity expands POS terminal multitasking
  • DDR4 2133 speed matches system memory bus
  • 2 V low voltage reduces power draw
  • 260-pin SODIMM fits POSIFLEX XT-6315 slot
  • CL15 latency supports responsive transaction processing

ข้อมูลจำเพาะ

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2133MHZ Non-ECC Unbuffered SODIMM
Part NumberMS17000-828K1
Capacity8GB
SpeedDDR4 2133 (PC4 17000)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL15
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2133MHZ PC4-17000 2Rx8 1.2V CL15 260-PIN Non-ECC Unbuffered SODIMM

คำถามเกี่ยวกับสินค้านี้

Will this DDR4 2133 SODIMM run with the existing memory already installed in my POSIFLEX XT-6315?

The module is DDR4 2133 PC4-17000 CL15 1.2V unbuffered non-ECC. Match those specs on your current sticks for best compatibility.

How can I verify the 8GB module is recognised at the correct 2133 MT/s speed after installation?

Enter the BIOS or use a system information tool; the memory should report DDR4 2133 (PC4-17000) with CL15 timings at 1.2V.

Does the package include only the 260-pin SODIMM or are tools and brackets also supplied?

The box contains the single 8GB 260-pin DDR4 SODIMM; no tools, brackets or additional cables are included.

อื่น ๆ ในหมวดนี้

ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้

หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที