BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00277873BTC
Διαθέσιμο
NEMIX RAM
NEMIX RAM 96GB (2x48GB) DDR5 5600 CL46 2Rx8 1.1V UDIMM Supermicro BH4SRG memory upgrade
A 96GB dual-channel kit of 5600MHz DDR5 UDIMM memory built for Supermicro BH4SRG motherboards
- Capacity96GB (2 x 48GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 96 GB total capacity with two 48 GB modules
- DDR5 5600 MT/s speed rated at PC5-44800 bandwidth
- Low 1.1 V operating voltage for efficient power use
- CL46 CAS latency for responsive memory timing
- 288-pin UDIMM form factor fits Supermicro BH4SRG motherboard
96 GB DDR5 kit for Supermicro BH4SRG
This 96 GB kit contains two 48 GB DDR5 5600 UDIMMs built for the Supermicro BH4SRG motherboard. The modules run at 1.1 V with CL46 latency and a 2Rx8 organisation. They are non‑ECC and unbuffered, matching the board’s desktop memory slots.
Capacity and headroom
The 96 GB total gives ample room for virtual machines, large datasets and memory‑heavy applications. Workloads that exceed this capacity will swap to storage, reducing responsiveness. The two‑module layout leaves no free DIMM slots for further expansion on a four‑slot board.
DDR5 5600 interface limits
DDR5 5600 (PC5‑44800) sets the maximum data rate at 5600 MT/s. The 288‑pin UDIMM form factor fits only DDR5‑compatible desktop sockets. Higher speeds or registered ECC modules are not supported by this kit’s specification.
Βασικά χαρακτηριστικά
- 96 GB total capacity with two 48 GB modules
- DDR5 5600 MT/s speed rated at PC5-44800 bandwidth
- Low 1.1 V operating voltage for efficient power use
- CL46 CAS latency for responsive memory timing
- 288-pin UDIMM form factor fits Supermicro BH4SRG motherboard
Προδιαγραφές
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-4828K2 |
| Capacity | 96GB (2 x 48GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 96GB (2 x 48GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Ερωτήσεις για αυτό το προϊόν
Will the 5600 MT/s DDR5 UDIMM kit run at its rated speed alongside any existing DDR5 modules I keep in the Supermicro BH4SRG?
The kit is validated for DDR5 5600 (PC5-44800) on the Supermicro BH4SRG. Mixing with other DDR5 UDIMMs will work only if the board can train all slots at 5600 MT/s with matching timings and 1.1 V; otherwise the system will drop to the lowest common speed.
How can I confirm the 2 x 48 GB modules are operating at CL46 after installation?
Enter the BIOS or use a tool such as CPU-Z and verify the memory frequency shows 5600 MT/s with CAS latency 46 at 1.10 V. If the SPD reports those values and the system is stable under load, the kit is running as specified.
Does the MD44800-4828K2 package include anything besides the two 48 GB UDIMMs, or do I need extra parts?
The box contains only the two 48 GB DDR5 5600 UDIMMs. No heat spreaders, cables, screws or software are included; the Supermicro BH4SRG motherboard and a compatible CPU are the only other required components.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
