نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Two bare green DDR5 UDIMM modules side by side

NEMIX RAM

NEMIX RAM 96GB (2x48GB) DDR5 5600 CL46 2Rx8 1.1V UDIMM Supermicro BH4SRG memory upgrade

SKU CH-BJBV-42MGB

A 96GB dual-channel kit of 5600MHz DDR5 UDIMM memory built for Supermicro BH4SRG motherboards

  • Capacity96GB (2 x 48GB)
  • SpeedDDR5 5600 (PC5 44800)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 96 GB total capacity with two 48 GB modules
  • DDR5 5600 MT/s speed rated at PC5-44800 bandwidth
  • Low 1.1 V operating voltage for efficient power use
  • CL46 CAS latency for responsive memory timing
  • 288-pin UDIMM form factor fits Supermicro BH4SRG motherboard

96 GB DDR5 kit for Supermicro BH4SRG

This 96 GB kit contains two 48 GB DDR5 5600 UDIMMs built for the Supermicro BH4SRG motherboard. The modules run at 1.1 V with CL46 latency and a 2Rx8 organisation. They are non‑ECC and unbuffered, matching the board’s desktop memory slots.

Capacity and headroom

The 96 GB total gives ample room for virtual machines, large datasets and memory‑heavy applications. Workloads that exceed this capacity will swap to storage, reducing responsiveness. The two‑module layout leaves no free DIMM slots for further expansion on a four‑slot board.

DDR5 5600 interface limits

DDR5 5600 (PC5‑44800) sets the maximum data rate at 5600 MT/s. The 288‑pin UDIMM form factor fits only DDR5‑compatible desktop sockets. Higher speeds or registered ECC modules are not supported by this kit’s specification.

أبرز المميزات

  • 96 GB total capacity with two 48 GB modules
  • DDR5 5600 MT/s speed rated at PC5-44800 bandwidth
  • Low 1.1 V operating voltage for efficient power use
  • CL46 CAS latency for responsive memory timing
  • 288-pin UDIMM form factor fits Supermicro BH4SRG motherboard

المواصفات

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-4828K2
Capacity96GB (2 x 48GB)
SpeedDDR5 5600 (PC5 44800)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank2Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content96GB (2 x 48GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

أسئلة حول هذا المنتج

Will the 5600 MT/s DDR5 UDIMM kit run at its rated speed alongside any existing DDR5 modules I keep in the Supermicro BH4SRG?

The kit is validated for DDR5 5600 (PC5-44800) on the Supermicro BH4SRG. Mixing with other DDR5 UDIMMs will work only if the board can train all slots at 5600 MT/s with matching timings and 1.1 V; otherwise the system will drop to the lowest common speed.

How can I confirm the 2 x 48 GB modules are operating at CL46 after installation?

Enter the BIOS or use a tool such as CPU-Z and verify the memory frequency shows 5600 MT/s with CAS latency 46 at 1.10 V. If the SPD reports those values and the system is stable under load, the kit is running as specified.

Does the MD44800-4828K2 package include anything besides the two 48 GB UDIMMs, or do I need extra parts?

The box contains only the two 48 GB DDR5 5600 UDIMMs. No heat spreaders, cables, screws or software are included; the Supermicro BH4SRG motherboard and a compatible CPU are the only other required components.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.