Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

NEMIX RAM

NEMIX RAM CSE-735D4-1K26B 192GB (6x32GB) DDR5 4800 CL40 ECC RDIMM memory upgrade

SKU CH-2MXE-P72MK MPN CSE-735D4-1K26B

192 GB DDR5 4800 CL40 ECC registered kit with six 32 GB 1Rx4 modules at 1.1 V for SuperMicro SYS-531A-I workstations

  • Capacity192GB (6 x 32GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 192 GB total capacity from six 32 GB modules
  • DDR5 4800 speed rated at PC5-38400 for server workloads
  • ECC registered design detects and corrects data errors
  • 1 V operation reduces power draw in dense configurations
  • Validated for Supermicro SYS-531A-I and CSE-735D4 platforms

System-Specific DDR5 ECC RDIMM Kit

This 192 GB kit contains six 32 GB registered DDR5 modules rated at 4800 MT/s with CL40 latency and 1.10 V operation. It is built for the SuperMicro SuperWorkstation SYS-531A-I and compatible X13SRA-TF motherboards that require ECC RDIMM memory.

Upgrading from lower-capacity or non-ECC DDR5

The jump makes sense when workloads need 192 GB of registered, error-correcting memory for virtualization, large datasets or mission-critical services. Systems limited to fewer DIMM slots or consumer-grade unbuffered memory cannot use this kit.

DDR5 registered DIMM constraints

Registered DDR5 modules add a clock cycle of buffering, so the memory controller must support RDIMM topology and the specific 1Rx4 organization. Boards wired only for UDIMM or a different rank layout will not post with these modules installed.

Βασικά χαρακτηριστικά

  • 192 GB total capacity from six 32 GB modules
  • DDR5 4800 speed rated at PC5-38400 for server workloads
  • ECC registered design detects and corrects data errors
  • 1 V operation reduces power draw in dense configurations
  • Validated for Supermicro SYS-531A-I and CSE-735D4 platforms

Προδιαγραφές

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-314K6
Capacity192GB (6 x 32GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content192GB (6X32GB) DDR5 4800MHZ PC5-38400 1Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Ερωτήσεις για αυτό το προϊόν

Does the 288-pin DDR5 RDIMM form factor fit the Supermicro SuperWorkstation SYS-531A-I memory slots?

Yes, the kit uses the standard 288-pin DDR5 RDIMM form factor required by the Supermicro SuperWorkstation SYS-531A-I, so each 32 GB module seats directly in the system's DIMM slots.

What is the correct seating order for the six 1Rx4 modules on a Supermicro X13SRA-TF motherboard?

Populate the six slots following the motherboard's labelled channel sequence — usually CPU1_DIMM_A1 through CPU1_DIMM_D1 — pressing each module down until both retention clips click, the step most often missed.

When should the 1.10 V registered ECC modules be replaced in a continuous server workload?

ECC RDIMMs have no fixed service interval; replace a module only if the system logs correctable-error thresholds, UEFI memory tests fail, or the lifetime warranty process is invoked.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.