SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00501426BTC
재고 있음
NEMIX RAM
NEMIX RAM CSE-735D4-1K26B 192GB (6x32GB) DDR5 4800 CL40 ECC RDIMM memory upgrade
192 GB DDR5 4800 CL40 ECC registered kit with six 32 GB 1Rx4 modules at 1.1 V for SuperMicro SYS-531A-I workstations
- Capacity192GB (6 x 32GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 192 GB total capacity from six 32 GB modules
- DDR5 4800 speed rated at PC5-38400 for server workloads
- ECC registered design detects and corrects data errors
- 1 V operation reduces power draw in dense configurations
- Validated for Supermicro SYS-531A-I and CSE-735D4 platforms
System-Specific DDR5 ECC RDIMM Kit
This 192 GB kit contains six 32 GB registered DDR5 modules rated at 4800 MT/s with CL40 latency and 1.10 V operation. It is built for the SuperMicro SuperWorkstation SYS-531A-I and compatible X13SRA-TF motherboards that require ECC RDIMM memory.
Upgrading from lower-capacity or non-ECC DDR5
The jump makes sense when workloads need 192 GB of registered, error-correcting memory for virtualization, large datasets or mission-critical services. Systems limited to fewer DIMM slots or consumer-grade unbuffered memory cannot use this kit.
DDR5 registered DIMM constraints
Registered DDR5 modules add a clock cycle of buffering, so the memory controller must support RDIMM topology and the specific 1Rx4 organization. Boards wired only for UDIMM or a different rank layout will not post with these modules installed.
주요 특징
- 192 GB total capacity from six 32 GB modules
- DDR5 4800 speed rated at PC5-38400 for server workloads
- ECC registered design detects and corrects data errors
- 1 V operation reduces power draw in dense configurations
- Validated for Supermicro SYS-531A-I and CSE-735D4 platforms
사양
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-314K6 |
| Capacity | 192GB (6 x 32GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 1Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 192GB (6X32GB) DDR5 4800MHZ PC5-38400 1Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
이 상품에 대한 질문
Does the 288-pin DDR5 RDIMM form factor fit the Supermicro SuperWorkstation SYS-531A-I memory slots?
Yes, the kit uses the standard 288-pin DDR5 RDIMM form factor required by the Supermicro SuperWorkstation SYS-531A-I, so each 32 GB module seats directly in the system's DIMM slots.
What is the correct seating order for the six 1Rx4 modules on a Supermicro X13SRA-TF motherboard?
Populate the six slots following the motherboard's labelled channel sequence — usually CPU1_DIMM_A1 through CPU1_DIMM_D1 — pressing each module down until both retention clips click, the step most often missed.
When should the 1.10 V registered ECC modules be replaced in a continuous server workload?
ECC RDIMMs have no fixed service interval; replace a module only if the system logs correctable-error thresholds, UEFI memory tests fail, or the lifetime warranty process is invoked.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
