Twelve green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM DDR5 1.5TB 12x128GB 5600MHz CL46 ECC RDIMM memory upgrade

SKU CH-YPHF-89RQR

1.5 TB server kit with twelve 128 GB DDR5 registered ECC modules at 5600 MHz CL46 for Supermicro H13SSF

Capacity1.5TB (12 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes

Massive 1.5 TB capacity from twelve 128 GB modules
DDR5 5600 speed keeps data flowing at rated bandwidth
ECC and registered design correct errors and stabilise full population
1 V operation reduces power draw per module
Verified fit for Supermicro H13SSF motherboard

49.293,99 $

0.63412864 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες Δωρεάν
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

Exact-match DDR5 kit for Supermicro H13SSF

This 1.5TB kit delivers 12 modules of 128GB DDR5 5600 CL46 ECC RDIMM memory. It is built for administrators who need maximum registered capacity on the Supermicro H13SSF motherboard. The 2Rx4 organisation and 1.1V operation match the board's memory controller requirements exactly.

Sustained enterprise stability under full population

Registered buffering offloads the memory controller so all 12 slots run at the rated 5600MHz without downclocking. ECC corrects single-bit errors on the fly, preventing silent data corruption during continuous workloads. The major OEM Samsung, Micron or Hynix chips maintain specified timings at 1.1V across extended duty cycles.

Straightforward 288-pin RDIMM installation

Modules install in the standard 288-pin DDR5 RDIMM slots following the motherboard manual's population order. No heat spreaders are present, so clearance is not a concern. The critical step is verifying the exact DIMM sequence in the Supermicro H13SSF documentation before seating all 12 modules.

Βασικά χαρακτηριστικά

Massive 1.5 TB capacity from twelve 128 GB modules
DDR5 5600 speed keeps data flowing at rated bandwidth
ECC and registered design correct errors and stabilise full population
1 V operation reduces power draw per module
Verified fit for Supermicro H13SSF motherboard

Προδιαγραφές

Brand	NEMIX RAM
Series	NEMIX RAM Original Series Server Memory
Model	DDR5 ECC RDIMM Registered Server Memory
Part Number	MR44800-724K12
Capacity	1.5TB (12 x 128GB)
Type	288-Pin DDR5 RDIMM
Speed	DDR5 5600 (PC5 44800)
CAS Latency	CL46
Voltage	1.10V
ECC	Yes
Buffered/Registered	Registered
Rank	2Rx4
Chipset	Major OEM Samsung, Micron, Hynix
Heat Spreader	No
Compatible System	Supermicro
Features	DDR5 ECC RDIMM Motherboard Compatible
Package Content	1.5TB 12X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Ερωτήσεις για αυτό το προϊόν

How much power and heat will the 1.1V DDR5 5600 RDIMMs generate when all twelve slots run 24/7?

Each module operates at 1.10 volts and DDR5 5600 speed. Registered buffering reduces electrical load on the memory controller, helping keep power draw and heat predictable across the full 1.5TB kit during continuous operation.

What must my motherboard provide for this 12 x 128GB kit to be recognised at full capacity?

The board needs twelve 288-pin DDR5 RDIMM slots, support for 2Rx4 registered ECC modules, and a memory controller validated for 1.5TB total capacity at DDR5 5600 (PC5-44800) with CL46 timing.

Can I mix these CL46 5600MHz RDIMMs with any older DDR5 modules I already have installed?

All twelve slots should use identical 2Rx4 registered ECC DDR5 5600 CL46 1.10V modules. Mixing different ranks, speeds, latencies or voltages will prevent the system from running at the rated 5600MHz.

Επίσης σε αυτό το ράφι