We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Twelve green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM DDR5 1.5TB 12x128GB 5600MHz CL46 ECC RDIMM memory upgrade

SKU CH-YPHF-89RQR

1.5 TB server kit with twelve 128 GB DDR5 registered ECC modules at 5600 MHz CL46 for Supermicro H13SSF

  • Capacity1.5TB (12 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • Massive 1.5 TB capacity from twelve 128 GB modules
  • DDR5 5600 speed keeps data flowing at rated bandwidth
  • ECC and registered design correct errors and stabilise full population
  • 1 V operation reduces power draw per module
  • Verified fit for Supermicro H13SSF motherboard

Exact-match DDR5 kit for Supermicro H13SSF

This 1.5TB kit delivers 12 modules of 128GB DDR5 5600 CL46 ECC RDIMM memory. It is built for administrators who need maximum registered capacity on the Supermicro H13SSF motherboard. The 2Rx4 organisation and 1.1V operation match the board's memory controller requirements exactly.

Sustained enterprise stability under full population

Registered buffering offloads the memory controller so all 12 slots run at the rated 5600MHz without downclocking. ECC corrects single-bit errors on the fly, preventing silent data corruption during continuous workloads. The major OEM Samsung, Micron or Hynix chips maintain specified timings at 1.1V across extended duty cycles.

Straightforward 288-pin RDIMM installation

Modules install in the standard 288-pin DDR5 RDIMM slots following the motherboard manual's population order. No heat spreaders are present, so clearance is not a concern. The critical step is verifying the exact DIMM sequence in the Supermicro H13SSF documentation before seating all 12 modules.

Highlights

  • Massive 1.5 TB capacity from twelve 128 GB modules
  • DDR5 5600 speed keeps data flowing at rated bandwidth
  • ECC and registered design correct errors and stabilise full population
  • 1 V operation reduces power draw per module
  • Verified fit for Supermicro H13SSF motherboard

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-724K12
Capacity1.5TB (12 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.5TB 12X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Questions about this item

How much power and heat will the 1.1V DDR5 5600 RDIMMs generate when all twelve slots run 24/7?

Each module operates at 1.10 volts and DDR5 5600 speed. Registered buffering reduces electrical load on the memory controller, helping keep power draw and heat predictable across the full 1.5TB kit during continuous operation.

What must my motherboard provide for this 12 x 128GB kit to be recognised at full capacity?

The board needs twelve 288-pin DDR5 RDIMM slots, support for 2Rx4 registered ECC modules, and a memory controller validated for 1.5TB total capacity at DDR5 5600 (PC5-44800) with CL46 timing.

Can I mix these CL46 5600MHz RDIMMs with any older DDR5 modules I already have installed?

All twelve slots should use identical 2Rx4 registered ECC DDR5 5600 CL46 1.10V modules. Mixing different ranks, speeds, latencies or voltages will prevent the system from running at the rated 5600MHz.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.