Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

NEMIX RAM

NEMIX RAM DDR5 32GB 4800MHz CL40 2Rx8 1.1V ECC Registered RDIMM memory upgrade

SKU CH-1GH0-8RXTV

32 GB DDR5 ECC registered DIMM running at 4800 MHz with CL40 latency and 1.1 V operation for the Supermicro H13SSL-N motherboard

  • Capacity32GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • Exact DDR5-4800 CL40 1.10V spec ensures full-speed recognition
  • 32GB 2Rx8 registered ECC RDIMM prevents silent data corruption
  • Verified fit for Supermicro H13SSL-N 288-pin RDIMM slots
  • Major Samsung Micron Hynix chips deliver enterprise-grade stability
  • Lifetime replacement warranty with US-based technical support included

32GB DDR5-4800 ECC RDIMM for Supermicro H13SSL-N

This 32GB DDR5-4800 Registered ECC module is built for the Supermicro H13SSL-N motherboard. It delivers 4800 MT/s at CL40 with a 1.10V operating voltage. The 2Rx8 organization matches the board's memory controller requirements for full-capacity recognition. System administrators expanding server memory capacity will find the exact specification match they need.

Registered buffer and 288-pin form factor ensure

The Registered RDIMM architecture buffers address and command signals, reducing electrical load on the memory controller when all slots are populated. ECC circuitry detects and corrects single-bit errors in real time, preventing silent data corruption. The 288-pin DDR5 connector is keyed differently from earlier generations, so it only fits compatible DDR5 server boards. No heat spreader is included, relying on chassis airflow for cooling.

Replaces slower or smaller DDR5 RDIMMs

Upgrading from lower-capacity DDR5 RDIMMs or slower speed grades restores headroom for virtualization, databases, and compute workloads. The jump is worth it when the motherboard manual confirms 32GB 2Rx8 Registered DIMMs in the planned population order. Buyers needing unbuffered UDIMMs, SODIMM form factors, or non-ECC memory for workstation or consumer platforms cannot use this module.

Βασικά χαρακτηριστικά

  • Exact DDR5-4800 CL40 1.10V spec ensures full-speed recognition
  • 32GB 2Rx8 registered ECC RDIMM prevents silent data corruption
  • Verified fit for Supermicro H13SSL-N 288-pin RDIMM slots
  • Major Samsung Micron Hynix chips deliver enterprise-grade stability
  • Lifetime replacement warranty with US-based technical support included

Προδιαγραφές

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K1
Capacity32GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Άλλες εκδόσεις αυτού του μοντέλου

5 ακόμη στην ίδια σειρά

Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.

Ερωτήσεις για αυτό το προϊόν

Does DDR5 4800MHz PC5-38400 run at its rated speed on the Supermicro H13SSL-N motherboard?

Yes, the module is spec-matched to the board's memory controller so it is recognised at full capacity and runs at DDR5 4800 (PC5-38400) without down-clocking.

What physical slot and form factor does this 288-pin RDIMM require?

It fits a standard 288-pin DDR5 RDIMM slot; the motherboard must accept registered DIMMs, not UDIMM or SODIMM.

How is the module installed and what step is often missed?

Power off the server, open the chassis, align the notch on the 288-pin edge connector with the slot key, press firmly until both retention clips click, then follow the motherboard manual's approved population order for registered ECC memory.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.