NEMIX RAM 32GB DDR5 4800 ECC Registered RDIMM 2Rx8 CL40 1.1V Supermicro H13SST-GC memory upgrade
- 32GB
- 288-Pin DDR5 RDIMM
NEMIX RAM
32 GB DDR5 ECC registered DIMM running at 4800 MHz with CL40 latency and 1.1 V operation for the Supermicro H13SSL-N motherboard
Size 32GB
This 32GB DDR5-4800 Registered ECC module is built for the Supermicro H13SSL-N motherboard. It delivers 4800 MT/s at CL40 with a 1.10V operating voltage. The 2Rx8 organization matches the board's memory controller requirements for full-capacity recognition. System administrators expanding server memory capacity will find the exact specification match they need.
The Registered RDIMM architecture buffers address and command signals, reducing electrical load on the memory controller when all slots are populated. ECC circuitry detects and corrects single-bit errors in real time, preventing silent data corruption. The 288-pin DDR5 connector is keyed differently from earlier generations, so it only fits compatible DDR5 server boards. No heat spreader is included, relying on chassis airflow for cooling.
Upgrading from lower-capacity DDR5 RDIMMs or slower speed grades restores headroom for virtualization, databases, and compute workloads. The jump is worth it when the motherboard manual confirms 32GB 2Rx8 Registered DIMMs in the planned population order. Buyers needing unbuffered UDIMMs, SODIMM form factors, or non-ECC memory for workstation or consumer platforms cannot use this module.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR38400-328K1 |
| Capacity | 32GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
このモデルの他のバージョン
同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。
Yes, the module is spec-matched to the board's memory controller so it is recognised at full capacity and runs at DDR5 4800 (PC5-38400) without down-clocking.
It fits a standard 288-pin DDR5 RDIMM slot; the motherboard must accept registered DIMMs, not UDIMM or SODIMM.
Power off the server, open the chassis, align the notch on the 288-pin edge connector with the slot key, press firmly until both retention clips click, then follow the motherboard manual's approved population order for registered ECC memory.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?