暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 384GB (4×96GB) DDR5 4800 CL40 ECC RDIMM Supermicro H13SSL-NT memory upgrade

SKU CH-FDTN-XEXJ2

384 GB DDR5-4800 registered ECC kit (4 × 96 GB, CL40, 1.10 V, 2Rx4) built for the Supermicro H13SSL-NT motherboard

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 384GB 4X96GB

他に 24点の構成を表示
  • 384 GB total capacity across four 96 GB modules
  • DDR5 4800 speed with CL40 latency for rated server performance
  • Registered ECC architecture corrects single-bit errors and supports full population
  • 1 V operation matches the motherboard memory controller specification
  • 288-pin RDIMM form factor verified for Supermicro H13SSL-NT

384 GB DDR5-4800 ECC RDIMM kit

This 384 GB kit contains four 96 GB DDR5-4800 (PC5-38400) Registered ECC RDIMMs. Each module runs at 1.1 V with CL40 timing and a 2Rx4 organisation. The 288-pin form factor matches the Supermicro H13SSL-NT motherboard slots exactly.

Suited for and not suited

This kit suits administrators expanding a Supermicro H13SSL-NT platform to its full 384 GB capacity with registered ECC modules. Builders needing unbuffered UDIMMs, non-ECC memory, lower capacities or a different DDR generation should select another product.

DDR5-4800 Registered ECC specification

The decisive specification is DDR5-4800 Registered ECC with CL40 latency at 1.1 V in a 2Rx4 288-pin RDIMM. Only modules matching this exact speed, voltage, rank and error-correction type will be recognised at full capacity and rated speed by the H13SSL-NT memory controller.

特長

  • 384 GB total capacity across four 96 GB modules
  • DDR5 4800 speed with CL40 latency for rated server performance
  • Registered ECC architecture corrects single-bit errors and supports full population
  • 1 V operation matches the motherboard memory controller specification
  • 288-pin RDIMM form factor verified for Supermicro H13SSL-NT

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 4X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does my Supermicro H13SSL-NT motherboard need to support 2Rx4 registered ECC RDIMMs for this 384GB kit to function?

Yes, the H13SSL-NT must accept 288-pin DDR5-4800 RDIMMs at 1.1V with CL40 timing and registered ECC architecture for the four 96GB modules to be recognised at full capacity.

Will these registered ECC RDIMMs work if I keep older registered ECC RDIMMs already installed in the server?

Mixing ranks, speeds or voltages can prevent the memory controller from initialising all slots; the board manual should confirm whether 2Rx4 DDR5-4800 1.1V modules can share channels with existing RDIMMs.

How can I verify the kit is running at DDR5-4800 CL40 1.1V after installation?

Enter the BIOS or use a hardware-inventory tool to confirm each slot shows 96GB, 4800 MT/s, CL40 latency, 1.1V operation and registered ECC status with no correctable errors reported.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。