暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR5 4800MHz ECC Registered RDIMM CL40 1.1V 1Rx8 288-Pin Supermicro H13SSL-N memory upgrade

SKU CH-VHD1-CMZ9Q

16 GB DDR5-4800 ECC registered RDIMM, CL40 at 1.1 V, single-rank 1Rx8, 288-pin, validated for Supermicro H13SSL-N

  • Capacity16GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 16GB

他に 24点の構成を表示
  • Exact DDR5-4800 spec match ensures full-speed recognition
  • Registered ECC design prevents silent data corruption
  • 1Rx8 1.1 V layout fits Supermicro H13SSL-N slots
  • 288-pin RDIMM form factor matches board requirements
  • CL40 CAS latency delivers rated server performance

Targeted Server Upgrade

This 16 GB DDR5 RDIMM is built as an exact-match upgrade for the Supermicro H13SSL-N motherboard. It delivers the precise rank, voltage, and timing the server's memory controller expects so the module is recognised at full capacity and runs at its rated 4800 MT/s speed. System administrators expanding memory in compatible Supermicro platforms can install it with confidence that the specifications align with the board's population rules.

Enterprise-Grade Build

The module uses a 288-pin Registered DIMM form factor with ECC and a registered buffer that offloads the memory controller, allowing every slot to run fully populated at full capacity. ECC corrects single-bit errors on the fly to prevent silent data corruption and unplanned reboots before they reach production. Major OEM chips from Samsung, Micron, or Hynix provide enterprise stability without a heat spreader for standard server airflow.

Critical Specification Match

The single specification that decides fitment is the 1Rx8 Registered ECC organisation at 1.1 V with CL40 latency. The board requires this exact rank, voltage, and timing combination; a UDIMM, SODIMM, or different rank configuration will not work. Buyers who need unbuffered memory, a different voltage, or non-ECC modules cannot use this part. Consult the motherboard manual for supported capacities and approved DIMM population order before purchase.

特長

  • Exact DDR5-4800 spec match ensures full-speed recognition
  • Registered ECC design prevents silent data corruption
  • 1Rx8 1.1 V layout fits Supermicro H13SSL-N slots
  • 288-pin RDIMM form factor matches board requirements
  • CL40 CAS latency delivers rated server performance

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K1
Capacity16GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What DDR5 speed and PC5 rating does this 16 GB RDIMM run at?

It operates at DDR5 4800 with a PC5-38400 data rate, so the memory controller sees the rated bandwidth without manual tuning.

Which motherboard and form factor must I have for this 288-pin module to seat correctly?

The stick is a 288-pin DDR5 RDIMM built for the Supermicro H13SSL-N; it will not fit UDIMM or SODIMM slots.

What population order does the H13SSL-N manual require when installing this 1Rx8 registered DIMM?

Follow the board manual's approved DIMM sequence — typically filling the primary channel slots first — so the registered buffer initialises and the system recognises the full 16 GB capacity.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。