暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM 64GB DDR5 4800 CL40 2Rx4 ECC RDIMM Supermicro H13SSL-N memory upgrade

SKU CH-XMBG-0YHVD

64 GB DDR5 4800 CL40 2Rx4 ECC registered RDIMM validated for the Supermicro H13SSL-N motherboard

  • Capacity64GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 64 GB capacity for large server workloads
  • DDR5 4800 speed matches the board's rated frequency
  • CL40 latency at 1.10 V for standard JEDEC operation
  • 2Rx4 registered ECC design enables full-slot population with error correction
  • 288-pin RDIMM form factor fits Supermicro H13SSL-N memory slots

Supermicro H13SSL-N 64 GB DDR5 upgrade

This NEMIX RAM module delivers 64 GB of DDR5 4800 memory in a 288-pin RDIMM form factor. It operates at 1.1 V with CL40 latency and uses a 2Rx4 registered ECC design. The stick is built as an exact-match upgrade for the Supermicro H13SSL-N motherboard.

Suited for registered ECC servers.

This module fits servers that require registered ECC RDIMMs with 2Rx4 organisation and 1.1 V operation. It will not work in systems that only accept unbuffered UDIMMs, SODIMMs, or non-ECC memory. Builders needing a different rank layout or voltage should verify their board's qualified vendor list first.

2Rx4 registered ECC at 1.1 V decides compatibility

The single specification that determines fit is the 2Rx4 registered ECC organisation running at 1.1 V. The Supermicro H13SSL-N memory controller expects this exact rank, buffering, and voltage combination to initialise at full 64 GB capacity and 4800 MT/s speed.

特長

  • 64 GB capacity for large server workloads
  • DDR5 4800 speed matches the board's rated frequency
  • CL40 latency at 1.10 V for standard JEDEC operation
  • 2Rx4 registered ECC design enables full-slot population with error correction
  • 288-pin RDIMM form factor fits Supermicro H13SSL-N memory slots

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K1
Capacity64GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does my Supermicro H13SSL-N motherboard need a specific DIMM population order for this 64GB 2Rx4 DDR5 4800 RDIMM?

Yes, the motherboard manual defines the supported capacities and approved DIMM population order. Follow that guide so the memory controller recognises the module at full capacity and rated speed.

Can I add this 2Rx4 Registered ECC DDR5 RDIMM to a server that already has 1Rx8 or 2Rx8 DDR5 RDIMMs installed?

Mixing different rank organisations is not recommended. The board's memory controller expects uniform rank and voltage across all populated slots for stable operation at 4800 MT/s.

How do I verify the module is running at 4800 MT/s with CL40 timings and ECC active after installation?

Check the BIOS memory information screen or use a tool such as dmidecode to confirm speed, CAS latency, voltage and ECC status match the rated 4800 MT/s, CL40, 1.1 V and Registered ECC configuration.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。