Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Green circuit board DDR5 RDIMM module with black memory chips, no heat spreader, 288-pin edge connector

NEMIX RAM

NEMIX RAM 64GB DDR5 4800 CL40 2Rx4 ECC RDIMM Supermicro H13SSL-N memory upgrade

SKU CH-XMBG-0YHVD

64 GB DDR5 4800 CL40 2Rx4 ECC registered RDIMM validated for the Supermicro H13SSL-N motherboard

  • Capacity64GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 64GB

Pokaż jeszcze 24 konfiguracji
  • 64 GB capacity for large server workloads
  • DDR5 4800 speed matches the board's rated frequency
  • CL40 latency at 1.10 V for standard JEDEC operation
  • 2Rx4 registered ECC design enables full-slot population with error correction
  • 288-pin RDIMM form factor fits Supermicro H13SSL-N memory slots

Supermicro H13SSL-N 64 GB DDR5 upgrade

This NEMIX RAM module delivers 64 GB of DDR5 4800 memory in a 288-pin RDIMM form factor. It operates at 1.1 V with CL40 latency and uses a 2Rx4 registered ECC design. The stick is built as an exact-match upgrade for the Supermicro H13SSL-N motherboard.

Suited for registered ECC servers.

This module fits servers that require registered ECC RDIMMs with 2Rx4 organisation and 1.1 V operation. It will not work in systems that only accept unbuffered UDIMMs, SODIMMs, or non-ECC memory. Builders needing a different rank layout or voltage should verify their board's qualified vendor list first.

2Rx4 registered ECC at 1.1 V decides compatibility

The single specification that determines fit is the 2Rx4 registered ECC organisation running at 1.1 V. The Supermicro H13SSL-N memory controller expects this exact rank, buffering, and voltage combination to initialise at full 64 GB capacity and 4800 MT/s speed.

Najważniejsze cechy

  • 64 GB capacity for large server workloads
  • DDR5 4800 speed matches the board's rated frequency
  • CL40 latency at 1.10 V for standard JEDEC operation
  • 2Rx4 registered ECC design enables full-slot population with error correction
  • 288-pin RDIMM form factor fits Supermicro H13SSL-N memory slots

Specyfikacja

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K1
Capacity64GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

Does my Supermicro H13SSL-N motherboard need a specific DIMM population order for this 64GB 2Rx4 DDR5 4800 RDIMM?

Yes, the motherboard manual defines the supported capacities and approved DIMM population order. Follow that guide so the memory controller recognises the module at full capacity and rated speed.

Can I add this 2Rx4 Registered ECC DDR5 RDIMM to a server that already has 1Rx8 or 2Rx8 DDR5 RDIMMs installed?

Mixing different rank organisations is not recommended. The board's memory controller expects uniform rank and voltage across all populated slots for stable operation at 4800 MT/s.

How do I verify the module is running at 4800 MT/s with CL40 timings and ECC active after installation?

Check the BIOS memory information screen or use a tool such as dmidecode to confirm speed, CAS latency, voltage and ECC status match the rated 4800 MT/s, CL40, 1.1 V and Registered ECC configuration.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.