Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Green circuit board DDR5 memory module with black chips no heat spreader 288 pins

NEMIX RAM

NEMIX RAM DDR5 5600 96GB ECC Registered RDIMM CL46 2Rx4 1.1V 288-pin memory upgrade

SKU CH-5635-NW5ZR

96 GB DDR5 5600 ECC registered RDIMM, CL46, 2Rx4, 1.1 V, 288-pin, validated for GIGABYTE MZ33-CP1 motherboard

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 96GB

Προβολή 24 ακόμη διαμορφώσεων
  • 96 GB capacity lets you populate every slot on the GIGABYTE MZ33-CP1 motherboard
  • DDR5 5600 speed with CL46 latency matches the board's rated timing for full-performance operation
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors to prevent silent data corruption
  • 1 V operating voltage and 2Rx4 rank configuration match the exact electrical spec the server expects
  • 288-pin RDIMM form factor fits the motherboard's DDR5 slots — not a UDIMM or SODIMM

Exact-match DDR5 server upgrade

This 96 GB DDR5-5600 registered ECC RDIMM is built to the precise rank, voltage and timing the GIGABYTE MZ33-CP1 motherboard expects. The 2Rx4 organisation and 1.1 V operation let the memory controller recognise full capacity and run at the rated 5600 MT/s speed without manual tuning.

Thermals, noise and power draw

Operating at the standard DDR5 voltage of 1.1 V, the module draws minimal power and produces little heat even when every slot is populated. No heat spreader is fitted, so airflow through the server chassis handles cooling silently without adding acoustic load to the system.

Sustained-load behaviour

Registered buffering offloads the memory controller, allowing all slots to run fully populated at full capacity for extended periods. On-die ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots during continuous production workloads.

Βασικά χαρακτηριστικά

  • 96 GB capacity lets you populate every slot on the GIGABYTE MZ33-CP1 motherboard
  • DDR5 5600 speed with CL46 latency matches the board's rated timing for full-performance operation
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors to prevent silent data corruption
  • 1 V operating voltage and 2Rx4 rank configuration match the exact electrical spec the server expects
  • 288-pin RDIMM form factor fits the motherboard's DDR5 slots — not a UDIMM or SODIMM

Προδιαγραφές

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Άλλες εκδόσεις αυτού του μοντέλου

5 ακόμη στην ίδια σειρά

Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.

Ερωτήσεις για αυτό το προϊόν

How do I install this 288-pin DDR5 RDIMM in the GIGABYTE MZ33-CP1, and which slot-population step is often missed?

Power down the server, open the chassis, and insert the module into the DIMM slot specified first in the motherboard manual — usually the slot farthest from the CPU. The step most people skip is checking the manual's required population order for registered ECC memory before seating the DIMM.

What maintenance or replacement will this 96GB 2Rx4 registered ECC kit need over its service life?

No scheduled maintenance is required. If a correctable error count climbs or the module fails POST, replace the affected DIMM. The registered buffer and on-die ECC handle single-bit corrections automatically; physical wear is negligible under normal server operating conditions.

What is the first limit that appears when this CL46 1.1V DDR5-5600 kit runs sustained workloads?

The CAS latency of 46 cycles at 5600 MT/s sets the baseline access delay. Under continuous load the memory controller's thermal throttling or the 1.1 V power envelope typically caps sustained throughput before the DRAM itself hits a hard limit.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.