Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green circuit board DDR5 memory module with black chips no heat spreader 288 pins

NEMIX RAM

NEMIX RAM DDR5 5600 96GB ECC Registered RDIMM CL46 2Rx4 1.1V 288-pin memory upgrade

SKU CH-5635-NW5ZR

96 GB DDR5 5600 ECC registered RDIMM, CL46, 2Rx4, 1.1 V, 288-pin, validated for GIGABYTE MZ33-CP1 motherboard

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 96GB

Nog 24 configuraties tonen
  • 96 GB capacity lets you populate every slot on the GIGABYTE MZ33-CP1 motherboard
  • DDR5 5600 speed with CL46 latency matches the board's rated timing for full-performance operation
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors to prevent silent data corruption
  • 1 V operating voltage and 2Rx4 rank configuration match the exact electrical spec the server expects
  • 288-pin RDIMM form factor fits the motherboard's DDR5 slots — not a UDIMM or SODIMM

Exact-match DDR5 server upgrade

This 96 GB DDR5-5600 registered ECC RDIMM is built to the precise rank, voltage and timing the GIGABYTE MZ33-CP1 motherboard expects. The 2Rx4 organisation and 1.1 V operation let the memory controller recognise full capacity and run at the rated 5600 MT/s speed without manual tuning.

Thermals, noise and power draw

Operating at the standard DDR5 voltage of 1.1 V, the module draws minimal power and produces little heat even when every slot is populated. No heat spreader is fitted, so airflow through the server chassis handles cooling silently without adding acoustic load to the system.

Sustained-load behaviour

Registered buffering offloads the memory controller, allowing all slots to run fully populated at full capacity for extended periods. On-die ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots during continuous production workloads.

Pluspunten

  • 96 GB capacity lets you populate every slot on the GIGABYTE MZ33-CP1 motherboard
  • DDR5 5600 speed with CL46 latency matches the board's rated timing for full-performance operation
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors to prevent silent data corruption
  • 1 V operating voltage and 2Rx4 rank configuration match the exact electrical spec the server expects
  • 288-pin RDIMM form factor fits the motherboard's DDR5 slots — not a UDIMM or SODIMM

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

How do I install this 288-pin DDR5 RDIMM in the GIGABYTE MZ33-CP1, and which slot-population step is often missed?

Power down the server, open the chassis, and insert the module into the DIMM slot specified first in the motherboard manual — usually the slot farthest from the CPU. The step most people skip is checking the manual's required population order for registered ECC memory before seating the DIMM.

What maintenance or replacement will this 96GB 2Rx4 registered ECC kit need over its service life?

No scheduled maintenance is required. If a correctable error count climbs or the module fails POST, replace the affected DIMM. The registered buffer and on-die ECC handle single-bit corrections automatically; physical wear is negligible under normal server operating conditions.

What is the first limit that appears when this CL46 1.1V DDR5-5600 kit runs sustained workloads?

The CAS latency of 46 cycles at 5600 MT/s sets the baseline access delay. Under continuous load the memory controller's thermal throttling or the 1.1 V power envelope typically caps sustained throughput before the DRAM itself hits a hard limit.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.