Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

NEMIX RAM

NEMIX RAM DDR5 6400 ECC Registered RDIMM 2TB 16x128GB CL52 1.1V 4Rx4 Supermicro X14DBG-LC+ memory upgrade

SKU CH-ES7C-YQGHK

A 2TB kit of 16 DDR5 6400 ECC registered RDIMMs at 1.1V CL52, validated for the Supermicro X14DBG-LC+ motherboard

  • Capacity2TB (16 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 2TB 16X128GB

Προβολή 3 ακόμη διαμορφώσεων
  • Massive 2 TB capacity from sixteen 128 GB modules
  • DDR5 6400 speed with CL52 latency for rated performance
  • Registered ECC design corrects errors and stabilises full population
  • 1 V operation matches server memory-controller requirements
  • Verified fit for Supermicro X14DBG-LC+ motherboard

Capacity and purpose

This 2TB kit delivers sixteen 128GB DDR5 RDIMM modules built for the Supermicro X14DBG-LC+ motherboard. Registered ECC design with 4Rx4 organisation and CL52 timing at 6400MT/s lets memory-heavy servers run every slot at full rated speed. It targets administrators who need maximum density without sacrificing error correction or signal integrity.

Replacing partial or mixed populations

Swapping smaller or mixed-rank DIMMs for this uniform 16-module set removes population-rule conflicts and lets the memory controller drive all channels at DDR5 6400 (PC5-51200). The jump is worth it when workloads demand the full 2TB address space and the board's qualified-vendor list calls for 4Rx4 registered parts at 1.1V. Builders staying below that capacity or using consumer UDIMMs will not benefit.

Build integration

The 288-pin registered form factor fits only boards wired for RDIMMs; it will not seat in UDIMM or SODIMM slots. No heat spreader is included, so chassis airflow must handle thermal load across all sixteen slots. Installers should follow the motherboard manual for exact population order and BIOS settings to activate the full kit at its rated CL52 latency.

Βασικά χαρακτηριστικά

  • Massive 2 TB capacity from sixteen 128 GB modules
  • DDR5 6400 speed with CL52 latency for rated performance
  • Registered ECC design corrects errors and stabilises full population
  • 1 V operation matches server memory-controller requirements
  • Verified fit for Supermicro X14DBG-LC+ motherboard

Προδιαγραφές

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-744K16
Capacity2TB (16 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content2TB 16X128GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT

Άλλες εκδόσεις αυτού του μοντέλου

5 ακόμη στην ίδια σειρά

Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.

Ερωτήσεις για αυτό το προϊόν

What slot type and pin count does the Supermicro X14DBG-LC+ require for these 288-pin DDR5 RDIMMs?

The motherboard uses standard 288-pin DDR5 RDIMM slots; each of the 16 modules in this kit is a 288-pin registered DIMM that seats directly into those slots.

In what population order should the 16 128GB 4Rx4 modules be installed to match the board's memory rules?

Consult the Supermicro X14DBG-LC+ manual for the approved DIMM population sequence; the kit provides 16 identical 4Rx4 modules so you can fill every slot in the order the manual specifies.

Do these registered ECC modules need any firmware updates or periodic replacement after deployment?

No firmware updates are required for the memory itself; registered ECC RDIMMs are solid-state components with no moving parts and no scheduled replacement interval.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.