Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Sixteen green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 6400 ECC Registered RDIMM 2TB 16x128GB CL52 1.1V 4Rx4 Supermicro X14DBG-LC+ memory upgrade

SKU CH-ES7C-YQGHK

A 2TB kit of 16 DDR5 6400 ECC registered RDIMMs at 1.1V CL52, validated for the Supermicro X14DBG-LC+ motherboard

  • Capacity2TB (16 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 2TB 16X128GB

Mostra altre 3 configurazioni
  • Massive 2 TB capacity from sixteen 128 GB modules
  • DDR5 6400 speed with CL52 latency for rated performance
  • Registered ECC design corrects errors and stabilises full population
  • 1 V operation matches server memory-controller requirements
  • Verified fit for Supermicro X14DBG-LC+ motherboard

Capacity and purpose

This 2TB kit delivers sixteen 128GB DDR5 RDIMM modules built for the Supermicro X14DBG-LC+ motherboard. Registered ECC design with 4Rx4 organisation and CL52 timing at 6400MT/s lets memory-heavy servers run every slot at full rated speed. It targets administrators who need maximum density without sacrificing error correction or signal integrity.

Replacing partial or mixed populations

Swapping smaller or mixed-rank DIMMs for this uniform 16-module set removes population-rule conflicts and lets the memory controller drive all channels at DDR5 6400 (PC5-51200). The jump is worth it when workloads demand the full 2TB address space and the board's qualified-vendor list calls for 4Rx4 registered parts at 1.1V. Builders staying below that capacity or using consumer UDIMMs will not benefit.

Build integration

The 288-pin registered form factor fits only boards wired for RDIMMs; it will not seat in UDIMM or SODIMM slots. No heat spreader is included, so chassis airflow must handle thermal load across all sixteen slots. Installers should follow the motherboard manual for exact population order and BIOS settings to activate the full kit at its rated CL52 latency.

Punti di forza

  • Massive 2 TB capacity from sixteen 128 GB modules
  • DDR5 6400 speed with CL52 latency for rated performance
  • Registered ECC design corrects errors and stabilises full population
  • 1 V operation matches server memory-controller requirements
  • Verified fit for Supermicro X14DBG-LC+ motherboard

Caratteristiche tecniche

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-744K16
Capacity2TB (16 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content2TB 16X128GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT

Altre versioni di questo modello

altri 5 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

What slot type and pin count does the Supermicro X14DBG-LC+ require for these 288-pin DDR5 RDIMMs?

The motherboard uses standard 288-pin DDR5 RDIMM slots; each of the 16 modules in this kit is a 288-pin registered DIMM that seats directly into those slots.

In what population order should the 16 128GB 4Rx4 modules be installed to match the board's memory rules?

Consult the Supermicro X14DBG-LC+ manual for the approved DIMM population sequence; the kit provides 16 identical 4Rx4 modules so you can fill every slot in the order the manual specifies.

Do these registered ECC modules need any firmware updates or periodic replacement after deployment?

No firmware updates are required for the memory itself; registered ECC RDIMMs are solid-state components with no moving parts and no scheduled replacement interval.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.