Two green DDR5 RDIMM modules, bare chips, no heat spreader

NEMIX RAM

NEMIX RAM MR51200-618K2 32GB (2x16GB) DDR5 6400 CL52 ECC RDIMM memory upgrade

SKU CH-R3FH-DSZ0G

A 32GB dual-module DDR5 kit with ECC and registered buffering for Supermicro H14DSH servers, running at 6400MHz CL52 on 1.1V

Capacity32GB (2 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes

32 GB capacity from a matched 2 x 16 GB kit for full server density
DDR5 6400 speed with CL52 latency at 1.1 V for rated throughput
ECC and registered design corrects single-bit errors and offloads the memory controller
288-pin RDIMM form factor verified for Supermicro H14DSH motherboard fitment
Built with major OEM chips from Samsung, Micron or Hynix for enterprise reliability

967,99 $

0.01238045 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες Δωρεάν
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

Exact DDR5-6400 ECC RDIMM kit for Supermicro H14DSH

This 32 GB kit contains two 16 GB DDR5 6400 (PC5-51200) registered ECC modules built to the exact rank, voltage and timing the Supermicro H14DSH memory controller expects. It is intended for server administrators who need guaranteed full-capacity recognition and rated-speed operation on that specific motherboard.

Registered ECC with 1Rx8 organisation and 1.10 V

The single specification that determines fit is the 1Rx8 registered ECC organisation at 1.10 V with CL52 latency. The H14DSH requires 288-pin RDIMMs with this precise electrical profile; a UDIMM, SODIMM or different rank configuration will not be recognised or will run at reduced capacity.

Keyed 288-pin RDIMM installation

Installation follows standard RDIMM keying: align the notch, press evenly until the latches click. The main risk is violating the motherboard's DIMM population order — consult the H14DSH manual for the approved slot sequence before seating both modules, otherwise the system may fail to post or report reduced memory.

Βασικά χαρακτηριστικά

32 GB capacity from a matched 2 x 16 GB kit for full server density
DDR5 6400 speed with CL52 latency at 1.1 V for rated throughput
ECC and registered design corrects single-bit errors and offloads the memory controller
288-pin RDIMM form factor verified for Supermicro H14DSH motherboard fitment
Built with major OEM chips from Samsung, Micron or Hynix for enterprise reliability

Προδιαγραφές

Brand	NEMIX RAM
Series	NEMIX RAM Original Series Server Memory
Model	DDR5 ECC RDIMM Registered Server Memory
Part Number	MR51200-618K2
Capacity	32GB (2 x 16GB)
Type	288-Pin DDR5 RDIMM
Speed	DDR5 6400 (PC5 51200)
CAS Latency	CL52
Voltage	1.10V
ECC	Yes
Buffered/Registered	Registered
Rank	1Rx8
Chipset	Major OEM Samsung, Micron, Hynix
Heat Spreader	No
Compatible System	Supermicro
Features	DDR5 ECC RDIMM Motherboard Compatible
Package Content	32GB 2X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Ερωτήσεις για αυτό το προϊόν

How does the DDR5 6400 speed translate when the kit is installed in a Supermicro H14DSH?

The modules run at their rated 6400 MT/s with CL52 timing at 1.10 V, so the memory controller sees the full data rate without downclocking.

What does the registered ECC RDIMM interface cap in a fully populated server?

Registered buffering offloads the memory controller, allowing every slot to run at the full 32 GB kit capacity while ECC corrects single-bit errors on the fly.

What physical slot and clearance does this 288-pin DDR5 RDIMM kit need?

It requires a standard 288-pin DDR5 RDIMM socket; the modules have no heat spreader, so they fit in tight server DIMM arrays without extra height.

Επίσης σε αυτό το ράφι