暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR5 RDIMM modules, bare chips, no heat spreader

NEMIX RAM

NEMIX RAM MR51200-618K2 32GB (2x16GB) DDR5 6400 CL52 ECC RDIMM memory upgrade

SKU CH-R3FH-DSZ0G

A 32GB dual-module DDR5 kit with ECC and registered buffering for Supermicro H14DSH servers, running at 6400MHz CL52 on 1.1V

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 32 GB capacity from a matched 2 x 16 GB kit for full server density
  • DDR5 6400 speed with CL52 latency at 1.1 V for rated throughput
  • ECC and registered design corrects single-bit errors and offloads the memory controller
  • 288-pin RDIMM form factor verified for Supermicro H14DSH motherboard fitment
  • Built with major OEM chips from Samsung, Micron or Hynix for enterprise reliability

Exact DDR5-6400 ECC RDIMM kit for Supermicro H14DSH

This 32 GB kit contains two 16 GB DDR5 6400 (PC5-51200) registered ECC modules built to the exact rank, voltage and timing the Supermicro H14DSH memory controller expects. It is intended for server administrators who need guaranteed full-capacity recognition and rated-speed operation on that specific motherboard.

Registered ECC with 1Rx8 organisation and 1.10 V

The single specification that determines fit is the 1Rx8 registered ECC organisation at 1.10 V with CL52 latency. The H14DSH requires 288-pin RDIMMs with this precise electrical profile; a UDIMM, SODIMM or different rank configuration will not be recognised or will run at reduced capacity.

Keyed 288-pin RDIMM installation

Installation follows standard RDIMM keying: align the notch, press evenly until the latches click. The main risk is violating the motherboard's DIMM population order — consult the H14DSH manual for the approved slot sequence before seating both modules, otherwise the system may fail to post or report reduced memory.

特長

  • 32 GB capacity from a matched 2 x 16 GB kit for full server density
  • DDR5 6400 speed with CL52 latency at 1.1 V for rated throughput
  • ECC and registered design corrects single-bit errors and offloads the memory controller
  • 288-pin RDIMM form factor verified for Supermicro H14DSH motherboard fitment
  • Built with major OEM chips from Samsung, Micron or Hynix for enterprise reliability

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT

この商品に関する質問

How does the DDR5 6400 speed translate when the kit is installed in a Supermicro H14DSH?

The modules run at their rated 6400 MT/s with CL52 timing at 1.10 V, so the memory controller sees the full data rate without downclocking.

What does the registered ECC RDIMM interface cap in a fully populated server?

Registered buffering offloads the memory controller, allowing every slot to run at the full 32 GB kit capacity while ECC corrects single-bit errors on the fly.

What physical slot and clearance does this 288-pin DDR5 RDIMM kit need?

It requires a standard 288-pin DDR5 RDIMM socket; the modules have no heat spreader, so they fit in tight server DIMM arrays without extra height.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。