OEM Industries
OEM Industries AB06012MB250300 60mm 12V 0.18A 3 Pin CPU cooler
60 mm 12 V ball-bearing fan with three-pin connector for compact CPU cooling
- ColorBlack
- TypeFan only
- Fan Size60mm
- Bearing TypeBall
- Power Connector3 Pin
- LEDNo
- 60 mm frame fits compact builds
- Ball bearing reduces wear over sleeve types
- 12 V 0.18 A draw keeps power use low
- Three-pin connector enables speed reporting
- Blower design directs airflow through tight channels
Compact 60mm CPU fan for small-form-factor builds
This 60mm ADDA blower is a fan-only cooler designed for tight spaces such as projector cases or low-profile PCs. It runs on 12V power and draws 0.18A through a standard three-pin connector. The ball-bearing motor targets reliable operation in continuous-use scenarios.
Ball-bearing motor and three-pin control for daily
The ball bearing reduces friction compared with sleeve alternatives, helping the fan maintain consistent speed over time. A three-pin header allows the motherboard to monitor RPM and adjust voltage for quieter idle performance. No LED lighting is fitted, keeping the unit visually neutral inside enclosed chassis.
Replaces worn 6025 blowers in legacy
This unit suits repairs where an original 60mm blower has failed or become noisy. The jump is worth it when the existing cooler matches the 60x60x25mm footprint and 12V three-pin interface. Builders needing higher airflow, larger heatsinks or PWM control should look elsewhere.
Βασικά χαρακτηριστικά
- 60 mm frame fits compact builds
- Ball bearing reduces wear over sleeve types
- 12 V 0.18 A draw keeps power use low
- Three-pin connector enables speed reporting
- Blower design directs airflow through tight channels
Προδιαγραφές
| Model | AB06012MB250300 |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 60mm |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| LED | No |
Ερωτήσεις για αυτό το προϊόν
What does the 3-pin connector limit for speed control?
The 3-pin connector allows voltage-based speed regulation but cannot use PWM signals for finer control.
What clearance does the 60x60x25 mm frame require?
The fan needs a 60 mm square mounting hole pattern and 25 mm depth inside the chassis or heatsink shroud.
How is the three-wire lead connected to the motherboard header?
Align the keyed 3-pin plug with the CPU_FAN header so the sense wire sits on the correct pin; reversing it prevents RPM reporting.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.00001039BTC
Διαθέσιμο