暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

OEM Industries

OEM Industries AB06012MB250300 60mm 12V 0.18A 3 Pin CPU cooler

SKU CH-BHM8-W5P66 MPN AB06012MB250300

60 mm 12 V ball-bearing fan with three-pin connector for compact CPU cooling

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • 60 mm frame fits compact builds
  • Ball bearing reduces wear over sleeve types
  • 12 V 0.18 A draw keeps power use low
  • Three-pin connector enables speed reporting
  • Blower design directs airflow through tight channels

Compact 60mm CPU fan for small-form-factor builds

This 60mm ADDA blower is a fan-only cooler designed for tight spaces such as projector cases or low-profile PCs. It runs on 12V power and draws 0.18A through a standard three-pin connector. The ball-bearing motor targets reliable operation in continuous-use scenarios.

Ball-bearing motor and three-pin control for daily

The ball bearing reduces friction compared with sleeve alternatives, helping the fan maintain consistent speed over time. A three-pin header allows the motherboard to monitor RPM and adjust voltage for quieter idle performance. No LED lighting is fitted, keeping the unit visually neutral inside enclosed chassis.

Replaces worn 6025 blowers in legacy

This unit suits repairs where an original 60mm blower has failed or become noisy. The jump is worth it when the existing cooler matches the 60x60x25mm footprint and 12V three-pin interface. Builders needing higher airflow, larger heatsinks or PWM control should look elsewhere.

特長

  • 60 mm frame fits compact builds
  • Ball bearing reduces wear over sleeve types
  • 12 V 0.18 A draw keeps power use low
  • Three-pin connector enables speed reporting
  • Blower design directs airflow through tight channels

仕様

ModelAB06012MB250300
ColorBlack
TypeFan only
Fan Size60mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

この商品に関する質問

What does the 3-pin connector limit for speed control?

The 3-pin connector allows voltage-based speed regulation but cannot use PWM signals for finer control.

What clearance does the 60x60x25 mm frame require?

The fan needs a 60 mm square mounting hole pattern and 25 mm depth inside the chassis or heatsink shroud.

How is the three-wire lead connected to the motherboard header?

Align the keyed 3-pin plug with the CPU_FAN header so the sense wire sits on the correct pin; reversing it prevents RPM reporting.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。