OEM Industries
OEM Industries D04X-24JH 40mm 24V 0.06A Ball 3-Pin CPU Cooler
A 40 mm ball-bearing fan runs at 24 V and 0.06 A with a 3-pin connector
- ColorBlack
- TypeFan only
- Fan Size40mm
- Bearing TypeBall
- Power Connector3 Pin
- LEDNo
- Compact 40mm frame fits tight build spaces
- 24V 0.06A rating keeps power draw low
- Ball bearing design extends operational lifespan
- Three-pin connector enables motherboard speed control
- Nidec 4010 series delivers reliable targeted airflow
Compact 40 mm 24 V Fan for Niche Cooling Slots
The OEM Industries D04X-24JH is a 40 mm square fan built around a Nidec ball-bearing motor. It draws 0.06 A at 24 V and connects through a three-pin header. The unit is sold as a bare fan without heatsink or mounting hardware, intended as a direct replacement for the original 4010 form factor.
Suits maintainers who need an exact 24 V three-pin
Technicians servicing legacy industrial boards, embedded appliances or specialised server trays that specify this model will find a drop-in match. Builders whose systems supply only lower voltages, require PWM control or expect an integrated heatsink should look elsewhere.
The 24 V three-pin electrical interface decides fit
Only motherboards or controllers that deliver 24 V on a three-pin header can power this fan correctly. If the target header provides a different voltage or uses a four-pin PWM layout, the cooler will not operate as intended.
Βασικά χαρακτηριστικά
- Compact 40mm frame fits tight build spaces
- 24V 0.06A rating keeps power draw low
- Ball bearing design extends operational lifespan
- Three-pin connector enables motherboard speed control
- Nidec 4010 series delivers reliable targeted airflow
Προδιαγραφές
| Model | D04X-24JH |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 40mm |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| LED | No |
Ερωτήσεις για αυτό το προϊόν
How do I install the 40mm 3-pin fan and what step is often missed?
Mount the 40x40x10mm frame using four 4mm screws, connect the 3-pin plug to a 24V header, and verify the tachometer signal registers in BIOS — the third wire is the step most installers forget.
What maintenance will the ball-bearing 4010 fan need later?
The NBR ball bearing is sealed; no lubrication is required, but plan to replace the fan if airflow drops or noise rises after extended 24V 0.06A operation.
What limit appears first when the D04X-24JH runs continuously at 24V?
Sustained 24V 0.06A load makes bearing wear the first limiting factor; monitor RPM via the 3-pin tach signal and swap the unit once speed degrades.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.00001041BTC
Διαθέσιμο