Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Small black 40mm square cooling fan with three wire connector

OEM Industries

OEM Industries D04X-24JH 40mm 24V 0.06A Ball 3-Pin CPU Cooler

SKU CH-3XTP-QDAWK

A 40 mm ball-bearing fan runs at 24 V and 0.06 A with a 3-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size40mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • Compact 40mm frame fits tight build spaces
  • 24V 0.06A rating keeps power draw low
  • Ball bearing design extends operational lifespan
  • Three-pin connector enables motherboard speed control
  • Nidec 4010 series delivers reliable targeted airflow

Compact 40 mm 24 V Fan for Niche Cooling Slots

The OEM Industries D04X-24JH is a 40 mm square fan built around a Nidec ball-bearing motor. It draws 0.06 A at 24 V and connects through a three-pin header. The unit is sold as a bare fan without heatsink or mounting hardware, intended as a direct replacement for the original 4010 form factor.

Suits maintainers who need an exact 24 V three-pin

Technicians servicing legacy industrial boards, embedded appliances or specialised server trays that specify this model will find a drop-in match. Builders whose systems supply only lower voltages, require PWM control or expect an integrated heatsink should look elsewhere.

The 24 V three-pin electrical interface decides fit

Only motherboards or controllers that deliver 24 V on a three-pin header can power this fan correctly. If the target header provides a different voltage or uses a four-pin PWM layout, the cooler will not operate as intended.

Privalumai

  • Compact 40mm frame fits tight build spaces
  • 24V 0.06A rating keeps power draw low
  • Ball bearing design extends operational lifespan
  • Three-pin connector enables motherboard speed control
  • Nidec 4010 series delivers reliable targeted airflow

Specifikacijos

ModelD04X-24JH
ColorBlack
TypeFan only
Fan Size40mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

Klausimai apie šią prekę

How do I install the 40mm 3-pin fan and what step is often missed?

Mount the 40x40x10mm frame using four 4mm screws, connect the 3-pin plug to a 24V header, and verify the tachometer signal registers in BIOS — the third wire is the step most installers forget.

What maintenance will the ball-bearing 4010 fan need later?

The NBR ball bearing is sealed; no lubrication is required, but plan to replace the fan if airflow drops or noise rises after extended 24V 0.06A operation.

What limit appears first when the D04X-24JH runs continuously at 24V?

Sustained 24V 0.06A load makes bearing wear the first limiting factor; monitor RPM via the 3-pin tach signal and swap the unit once speed degrades.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.