OEM Industries
OEM Industries D05F-12BS2 50×25 mm 12 V 0.15 A 3-wire blower CPU cooler
Compact 50×25 mm blower fan runs on 12 V at 0.15 A with a 3-wire connection
- ColorBlack
- TypeFan only
- Fan Size50mm
- LEDNo
- Compact blower design directs airflow through tight spaces
- Nidec 5025 motor delivers reliable 12 V operation
- 50 × 25 mm footprint fits small-form-factor builds
- 15 A draw keeps power consumption low
- Three-wire connection enables speed monitoring
Compact blower for tight spaces
This 50 mm by 25 mm blower moves air through a focused outlet, making it suited to small-form-factor chassis or rack units where a traditional top-down cooler cannot fit. The three-wire connection provides tachometer feedback so the system can monitor fan speed. It runs on 12 V power and draws 0.15 A.
Steady airflow at constant voltage
Because the motor is rated for continuous 12 V operation at 0.15 A, the blower maintains a consistent flow rate during prolonged workloads without the current spikes seen in some PWM designs. The fixed-speed characteristic means acoustic output stays stable once the chassis reaches thermal equilibrium.
Check mounting pattern and header type
Verify that your motherboard or controller board offers a three-pin 12 V fan header and that the 50 mm square mounting holes align with the cooler bracket or heatsink base you intend to use. The blower-only design requires a separate heatsink or duct to direct air over the CPU die.
Βασικά χαρακτηριστικά
- Compact blower design directs airflow through tight spaces
- Nidec 5025 motor delivers reliable 12 V operation
- 50 × 25 mm footprint fits small-form-factor builds
- 15 A draw keeps power consumption low
- Three-wire connection enables speed monitoring
Προδιαγραφές
| Model | D05F-12BS2 |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 50mm |
| LED | No |
Ερωτήσεις για αυτό το προϊόν
How much power does the 12 V 0.15 A blower draw when running continuously?
The blower is rated at 12 V and 0.15 A, so it draws very little power even during all-day operation.
What connector does the 3-wire blower need on the motherboard or controller?
It uses a standard 3-wire fan header for power and tachometer signal.
Will the 50 mm blower fit in the same mounting holes as my existing 5025-size cooler?
Yes, the 50×25 mm frame matches the 5025 form factor used by many legacy coolers.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear



