Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen

OEM Industries

OEM Industries D05F-12BS2 50×25 mm 12 V 0.15 A 3-wire blower CPU cooler

SKU CH-EEXJ-PD1HH

Compact 50×25 mm blower fan runs on 12 V at 0.15 A with a 3-wire connection

  • ColorBlack
  • TypeFan only
  • Fan Size50mm
  • LEDNo
  • Compact blower design directs airflow through tight spaces
  • Nidec 5025 motor delivers reliable 12 V operation
  • 50 × 25 mm footprint fits small-form-factor builds
  • 15 A draw keeps power consumption low
  • Three-wire connection enables speed monitoring

Compact blower for tight spaces

This 50 mm by 25 mm blower moves air through a focused outlet, making it suited to small-form-factor chassis or rack units where a traditional top-down cooler cannot fit. The three-wire connection provides tachometer feedback so the system can monitor fan speed. It runs on 12 V power and draws 0.15 A.

Steady airflow at constant voltage

Because the motor is rated for continuous 12 V operation at 0.15 A, the blower maintains a consistent flow rate during prolonged workloads without the current spikes seen in some PWM designs. The fixed-speed characteristic means acoustic output stays stable once the chassis reaches thermal equilibrium.

Check mounting pattern and header type

Verify that your motherboard or controller board offers a three-pin 12 V fan header and that the 50 mm square mounting holes align with the cooler bracket or heatsink base you intend to use. The blower-only design requires a separate heatsink or duct to direct air over the CPU die.

Pluspunten

  • Compact blower design directs airflow through tight spaces
  • Nidec 5025 motor delivers reliable 12 V operation
  • 50 × 25 mm footprint fits small-form-factor builds
  • 15 A draw keeps power consumption low
  • Three-wire connection enables speed monitoring

Specificaties

ModelD05F-12BS2
ColorBlack
TypeFan only
Fan Size50mm
LEDNo

Vragen over dit artikel

How much power does the 12 V 0.15 A blower draw when running continuously?

The blower is rated at 12 V and 0.15 A, so it draws very little power even during all-day operation.

What connector does the 3-wire blower need on the motherboard or controller?

It uses a standard 3-wire fan header for power and tachometer signal.

Will the 50 mm blower fit in the same mounting holes as my existing 5025-size cooler?

Yes, the 50×25 mm frame matches the 5025 form factor used by many legacy coolers.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.