ORVIX
ORVIX 3mm M.2 2280 NVME Heatsink Green
3 mm aluminium heatsink with thermal pad fits 2280 NVME drives, adding finned cooling in tight spaces
- Fits M.2 2280 NVME drives with 70 mm length
- 3 mm thick design clears tight motherboard spaces
- Added fins spread heat across larger surface area
- Silicone thermal pad fills gaps for better contact
- Green anodised finish resists corrosion and looks clean
3 mm M.2 2280 Heatsink
The ORVIX 3 mm heatsink fits M.2 2280 NVME modules. It uses a thickened fin stack and an included silicone thermal pad to pull heat away from the controller and memory. The green anodised aluminium body measures 70 mm long by 22 mm wide and stands 3 mm tall. Builders with limited clearance around the slot should verify the vertical space before ordering.
Suits standard 2280 SSDs; not for shorter modules
This cooler targets owners of full-length 2280 drives who want lower operating temperatures without active airflow. The bundled thermal pad covers the main components on one side of the PCB. Buyers using 2230, 2242 or 2260 form factors cannot use this heatsink because the mounting holes and fin length are sized for 80 mm boards. Systems where the motherboard shroud or a graphics card leaves less than 3 mm of gap above the slot will also be incompatible.
3 mm overall height decides fit
The single specification that determines compatibility is the 3 mm stack height including the thermal pad. Measure the distance from the top of the installed SSD to the nearest obstruction; if that clearance is below 3 mm the heatsink will not seat properly and the drive may overheat or the case panel will not close.
Βασικά χαρακτηριστικά
- Fits M.2 2280 NVME drives with 70 mm length
- 3 mm thick design clears tight motherboard spaces
- Added fins spread heat across larger surface area
- Silicone thermal pad fills gaps for better contact
- Green anodised finish resists corrosion and looks clean
Προδιαγραφές
| Brand | ORVIX |
|---|
Ερωτήσεις για αυτό το προϊόν
Does the 2280 heatsink use the NVME interface?
The heatsink is a passive cooler that fits M.2 2280 NVME drives; it does not use an electrical interface itself.
What clearance does the 3 mm thick heatsink need above the drive?
The heatsink measures 70 mm long, 22 mm wide and 3 mm high; verify your motherboard or laptop has at least 3 mm of space above the M.2 slot.
How is the ORVIX heatsink installed on a 2280 SSD?
Peel the supplied silicone thermal pad, place it on the controller, press the heatsink firmly onto the pad, and ensure the fins sit flat without tilting.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
Black Box Corporation
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics
39,99 $
0.00051355BTC
Διαθέσιμο