Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

OWC

OWC 8GB DDR3 1333 PC3-10600 CL9 2Rx4 240-pin 1.5V ECC Registered RDIMM 1R3D32R408GB

SKU CH-A7VB-9YKD6

An 8 GB DDR3 1333 ECC registered DIMM for Supermicro X8DTL, X8DTN+, X8DTT, X8DTU and X8OBN motherboards

  • Capacity8GB
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes
  • ECC registered design protects data integrity in server workloads
  • 8 GB single module upgrades compatible Supermicro X8 series motherboards
  • DDR3 1333 PC3-10600 CL9 matches factory speed and latency specs
  • 5 V 240-pin RDIMM fits registered DIMM slots without extra power
  • Replaces six Supermicro part numbers for direct drop-in compatibility

8 GB ECC Registered DDR3 Module

This single 8 GB DDR3 1333 PC3-10600 CL9 2Rx4 240-pin 1.5 V ECC Registered RDIMM is built for Supermicro X8DTL, X8DTN+, X8DTT, X8DTU and X8OBN motherboards. It targets administrators who need to extend the life of existing server or workstation platforms with validated ECC memory.

Fits Supermicro X8 Series DIMM Slots

The module plugs directly into 240-pin DDR3 registered DIMM slots on the listed Supermicro boards and cannot be mixed with unbuffered memory. It frees the system from relying on slower or mismatched modules while maintaining full JEDEC and RoHS compliance.

Steady Throughput Under Continuous Load

Registered buffering and ECC correction keep data integrity intact during sustained multi-threaded workloads such as virtualization or database tasks. The CL9 latency at 1333 MT/s delivers predictable bandwidth without the variability seen in consumer-grade unbuffered memory.

Βασικά χαρακτηριστικά

  • ECC registered design protects data integrity in server workloads
  • 8 GB single module upgrades compatible Supermicro X8 series motherboards
  • DDR3 1333 PC3-10600 CL9 matches factory speed and latency specs
  • 5 V 240-pin RDIMM fits registered DIMM slots without extra power
  • Replaces six Supermicro part numbers for direct drop-in compatibility

Προδιαγραφές

BrandOWC
Part Number1R3D32R408GB
Capacity8GB
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X8DTL Series
Supermicro Motherboard X8DTN+ Series
Supermicro Motherboard X8DTT Series
Supermicro Motherboard X8DTU Series
Supermicro Motherboard X8OBN Series

Άλλες εκδόσεις αυτού του μοντέλου

5 ακόμη στην ίδια σειρά

Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.

Ερωτήσεις για αυτό το προϊόν

Will the CL9 latency at 1333 MHz stay stable when the server runs at full load for hours?

The module is built to JEDEC DDR3 1333 PC3-10600 CL9 timings at 1.5 V, so latency remains at the rated specification under continuous operation.

Does the registered ECC design add noticeable heat or fan noise in a Supermicro X8DTL chassis?

No heat spreader is fitted and the 1.5 V DDR3 registered DIMM draws standard power for its class, so thermal output matches typical server memory without extra cooling noise.

Which motherboard slot and firmware setup do I need before installing this 2Rx4 RDIMM?

A 240-pin DDR3 slot on a Supermicro X8DTL, X8DTN+, X8DTT, X8DTU or X8OBN board with ECC registered support enabled in BIOS is required for the module to function.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.