我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green circuit board with gold edge connectors and black memory chips

OWC

OWC 8GB DDR3 1333 PC3-10600 CL9 2Rx4 240-pin 1.5V ECC Registered RDIMM 1R3D32R408GB

SKU CH-A7VB-9YKD6

An 8 GB DDR3 1333 ECC registered DIMM for Supermicro X8DTL, X8DTN+, X8DTT, X8DTU and X8OBN motherboards

  • Capacity8GB
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 8GB

  • ECC registered design protects data integrity in server workloads
  • 8 GB single module upgrades compatible Supermicro X8 series motherboards
  • DDR3 1333 PC3-10600 CL9 matches factory speed and latency specs
  • 5 V 240-pin RDIMM fits registered DIMM slots without extra power
  • Replaces six Supermicro part numbers for direct drop-in compatibility

8 GB ECC Registered DDR3 Module

This single 8 GB DDR3 1333 PC3-10600 CL9 2Rx4 240-pin 1.5 V ECC Registered RDIMM is built for Supermicro X8DTL, X8DTN+, X8DTT, X8DTU and X8OBN motherboards. It targets administrators who need to extend the life of existing server or workstation platforms with validated ECC memory.

Fits Supermicro X8 Series DIMM Slots

The module plugs directly into 240-pin DDR3 registered DIMM slots on the listed Supermicro boards and cannot be mixed with unbuffered memory. It frees the system from relying on slower or mismatched modules while maintaining full JEDEC and RoHS compliance.

Steady Throughput Under Continuous Load

Registered buffering and ECC correction keep data integrity intact during sustained multi-threaded workloads such as virtualization or database tasks. The CL9 latency at 1333 MT/s delivers predictable bandwidth without the variability seen in consumer-grade unbuffered memory.

商品特色

  • ECC registered design protects data integrity in server workloads
  • 8 GB single module upgrades compatible Supermicro X8 series motherboards
  • DDR3 1333 PC3-10600 CL9 matches factory speed and latency specs
  • 5 V 240-pin RDIMM fits registered DIMM slots without extra power
  • Replaces six Supermicro part numbers for direct drop-in compatibility

商品規格

BrandOWC
Part Number1R3D32R408GB
Capacity8GB
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X8DTL Series
Supermicro Motherboard X8DTN+ Series
Supermicro Motherboard X8DTT Series
Supermicro Motherboard X8DTU Series
Supermicro Motherboard X8OBN Series

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Will the CL9 latency at 1333 MHz stay stable when the server runs at full load for hours?

The module is built to JEDEC DDR3 1333 PC3-10600 CL9 timings at 1.5 V, so latency remains at the rated specification under continuous operation.

Does the registered ECC design add noticeable heat or fan noise in a Supermicro X8DTL chassis?

No heat spreader is fitted and the 1.5 V DDR3 registered DIMM draws standard power for its class, so thermal output matches typical server memory without extra cooling noise.

Which motherboard slot and firmware setup do I need before installing this 2Rx4 RDIMM?

A 240-pin DDR3 slot on a Supermicro X8DTL, X8DTN+, X8DTT, X8DTU or X8OBN board with ECC registered support enabled in BIOS is required for the module to function.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。