PANO-MOUNTS
PANO-MOUNTS 12025RGBC3PACK 120mm RGB case fan 3-pack with remote controller
- 120×120×25mm 4.72*4…
- RGB
14,99 $
0.00019383BTC
Διαθέσιμο
PANO-MOUNTS
PANO-MOUNTS 120mm ARGB Case Fans 3-Pack Black 800-1800RPM
Three 120 mm ARGB case fans with hydraulic bearings, PWM speed control from 800 to 1800 RPM and a SATA adapter for lighting power
- Fan Size120mm
- LEDARGB
- TypeCase Fan
- Bearing TypeHydraulic bearing
- RPMVariable
- Air FlowVariable
LED ARGB
- RGB
- ARGB
- Addressable ARGB with 24 individually controlled LEDs per fan
- PWM speed range 800 to 1800 RPM balances airflow and noise
- Hydraulic bearing for quiet, durable operation
- 5 V 3-pin ARGB syncs with major motherboard software
- SATA adapter cable powers lighting without a dedicated ARGB header
Three-pack ARGB case fans
This set contains three 120 mm case fans with 24 individually addressable ARGB LEDs per unit. Hydraulic bearings and a 25 mm frame thickness suit standard case mounting points. The fans connect via 4-pin PWM and 3-pin 5 V ARGB headers and include a SATA adapter cable for power when motherboard headers are limited. Builders wanting synchronised lighting across multiple intake or exhaust positions can use this kit.
Integration with motherboards and cases
Each fan provides a 4-pin PWM male and female connector for daisy-chaining speed control and a 3-pin 5 V ARGB lead for addressable lighting. The bundled SATA adapter cable lets the lighting run directly from a power-supply SATA plug when 5 V ARGB headers are absent or fully occupied. PWM control allows the motherboard to vary speed automatically based on CPU temperature curves. The 120 mm square footprint fits common case fan mounts and radiator brackets.
Thermals, noise and power
Speed ranges from 800 to 1800 RPM under PWM control, letting the system balance airflow against acoustic output. Hydraulic bearings contribute to consistent low-speed operation. Power for the ARGB LEDs and motor is drawn through the PWM and SATA connections without a separate controller. The variable airflow and noise specifications mean actual acoustics depend on the fan curve configured in BIOS or software.
Βασικά χαρακτηριστικά
- Addressable ARGB with 24 individually controlled LEDs per fan
- PWM speed range 800 to 1800 RPM balances airflow and noise
- Hydraulic bearing for quiet, durable operation
- 5 V 3-pin ARGB syncs with major motherboard software
- SATA adapter cable powers lighting without a dedicated ARGB header
Προδιαγραφές
| Fan Size | 120mm |
|---|---|
| LED | ARGB |
| Type | Case Fan |
| Bearing Type | Hydraulic bearing |
| RPM | Variable |
| Air Flow | Variable |
| Noise Level | Variable |
| Power Connector | 3 / 4 Pin |
| Color | Black |
| Compatibility | Case |
| Fan Counts | 3 Fans |
| Fan Controller | No Controller |
| Fan Thickness | 25mm |
| Features | Vivid Lighting Effects |
| Dimensions | 120×120×25mm 4.72*4.72*0.98in |
Άλλες εκδόσεις αυτού του μοντέλου
1 ακόμη στην ίδια σειρά
Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.
Ερωτήσεις για αυτό το προϊόν
What is the maximum RPM the 120mm ARGB fans can reach under sustained load?
The fans adjust dynamically up to 1800 RPM via the 4-pin PWM interface, so 1800 RPM is the ceiling you will see when the CPU temperature stays high.
How loud are the three fans when they run all day at typical speeds?
Noise varies with speed; the hydraulic-bearing design operates between 6 and 28 dBA across the 800–1800 RPM range, so sustained use stays at the lower end of that band.
Which motherboard headers or adapters must I already have to power and control the ARGB lighting?
You need a 5 V 3-pin addressable RGB header for lighting sync, a 4-pin PWM header for speed control, and a free SATA power connector for the included adapter cable.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.0000106BTC
Διαθέσιμο