Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Three black 120mm square fans with ARGB lighting rings, 25mm thick, shown as a triple pack

PANO-MOUNTS

PANO-MOUNTS 120mm ARGB Case Fans 3-Pack Black 800-1800RPM

SKU CH-8VZX-8ZRPN

Three 120 mm ARGB case fans with hydraulic bearings, PWM speed control from 800 to 1800 RPM and a SATA adapter for lighting power

  • Fan Size120mm
  • LEDARGB
  • TypeCase Fan
  • Bearing TypeHydraulic bearing
  • RPMVariable
  • Air FlowVariable

LED ARGB

  • Addressable ARGB with 24 individually controlled LEDs per fan
  • PWM speed range 800 to 1800 RPM balances airflow and noise
  • Hydraulic bearing for quiet, durable operation
  • 5 V 3-pin ARGB syncs with major motherboard software
  • SATA adapter cable powers lighting without a dedicated ARGB header

Three-pack ARGB case fans

This set contains three 120 mm case fans with 24 individually addressable ARGB LEDs per unit. Hydraulic bearings and a 25 mm frame thickness suit standard case mounting points. The fans connect via 4-pin PWM and 3-pin 5 V ARGB headers and include a SATA adapter cable for power when motherboard headers are limited. Builders wanting synchronised lighting across multiple intake or exhaust positions can use this kit.

Integration with motherboards and cases

Each fan provides a 4-pin PWM male and female connector for daisy-chaining speed control and a 3-pin 5 V ARGB lead for addressable lighting. The bundled SATA adapter cable lets the lighting run directly from a power-supply SATA plug when 5 V ARGB headers are absent or fully occupied. PWM control allows the motherboard to vary speed automatically based on CPU temperature curves. The 120 mm square footprint fits common case fan mounts and radiator brackets.

Thermals, noise and power

Speed ranges from 800 to 1800 RPM under PWM control, letting the system balance airflow against acoustic output. Hydraulic bearings contribute to consistent low-speed operation. Power for the ARGB LEDs and motor is drawn through the PWM and SATA connections without a separate controller. The variable airflow and noise specifications mean actual acoustics depend on the fan curve configured in BIOS or software.

Puncte forte

  • Addressable ARGB with 24 individually controlled LEDs per fan
  • PWM speed range 800 to 1800 RPM balances airflow and noise
  • Hydraulic bearing for quiet, durable operation
  • 5 V 3-pin ARGB syncs with major motherboard software
  • SATA adapter cable powers lighting without a dedicated ARGB header

Specificații

Fan Size120mm
LEDARGB
TypeCase Fan
Bearing TypeHydraulic bearing
RPMVariable
Air FlowVariable
Noise LevelVariable
Power Connector3 / 4 Pin
ColorBlack
CompatibilityCase
Fan Counts3 Fans
Fan ControllerNo Controller
Fan Thickness25mm
FeaturesVivid Lighting Effects
Dimensions120×120×25mm 4.72*4.72*0.98in

Alte versiuni ale acestui model

1 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

What is the maximum RPM the 120mm ARGB fans can reach under sustained load?

The fans adjust dynamically up to 1800 RPM via the 4-pin PWM interface, so 1800 RPM is the ceiling you will see when the CPU temperature stays high.

How loud are the three fans when they run all day at typical speeds?

Noise varies with speed; the hydraulic-bearing design operates between 6 and 28 dBA across the 800–1800 RPM range, so sustained use stays at the lower end of that band.

Which motherboard headers or adapters must I already have to power and control the ARGB lighting?

You need a 5 V 3-pin addressable RGB header for lighting sync, a 4-pin PWM header for speed control, and a free SATA power connector for the included adapter cable.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.