PrimoChill G 1/4in 7.5mm SX Extension Coupler diy cooling
- CPU Block
Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.
PrimoChill
A compact G 1/4" male-to-male extension coupler with diamond-knurled coated brass body and pre-installed O-rings for custom liquid-cooling loops
Option Silver Nickel
Οι διαγραμμένες εκδόσεις υπάρχουν, αλλά δεν είναι διαθέσιμες εδώ.
The PrimoChill Dual Male G1/4" Extension Coupler Mini converts a female G 1/4" thread into a male thread for custom water-cooling loops. It suits builders who need a short, rigid spacer between two female fittings or components. The diamond-knurled body provides grip for hand tightening. Buyers who want a rotating angled adapter or a longer rigid tube will not find that function here.
As a passive brass fitting the coupler adds no heat, noise or electrical draw to the loop. Its internal bore matches standard G 1/4" flow paths so restriction is negligible in normal operation. The nickel coating resists corrosion from common coolants. Installers should still pressure-test the completed loop before powering the system.
The package includes one mini coupler with two O-rings already seated in the grooves. No tools, lubricants or software are supplied. The pre-installed O-rings save assembly time and reduce the chance of missing seals during build. Candy SX finish tone may vary between knurled and smooth surfaces.
| Type | CPU Block |
|---|
Άλλες εκδόσεις αυτού του μοντέλου
Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.
Thread each male G 1/4in. end into the female ports of your blocks, radiators or fittings by hand, then snug gently with a wrench on the knurled section; the step many miss is confirming both pre-installed O-rings stay seated in their grooves during tightening.
The nickel-coated brass body is durable, but the two installed O-rings can degrade from coolant additives or heat cycles; plan to replace them with standard G 1/4in. O-rings during routine loop draining or if any seepage appears at the threads.
The practical limit is the O-ring seal; prolonged high temperatures or aggressive coolant chemistries can harden the elastomer, causing weepage at the male G 1/4in. threads before the coated brass body shows any fatigue.
Επίσης σε αυτό το ράφι
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
Το νόμισμα στο οποίο πληρώνετε, και αυτό στο οποίο βλέπετε τις τιμές.
Αποστέλλεται από το πορτοφόλι σας στο ταμείο
Μόνο για προβολή — ο κατάλογος αναγράφεται σε δολάρια
Κανένα νόμισμα δεν αντιστοιχεί.
Επιλέξτε τη γλώσσα στην οποία σας μιλάει ο ιστότοπος.
Καμία γλώσσα δεν ταιριάζει.
Πρώτη επίσκεψη;
Έχετε ήδη λογαριασμό;
Δεν υπάρχει αυτόματη επαναφορά κωδικού: αυτό το κατάστημα δεν στέλνει e-mail, άρα δεν υπάρχει σύνδεσμος μίας χρήσης να ζητήσετε. Αφήστε τη διεύθυνση στον λογαριασμό σας και κάποιος θα την επεξεργαστεί με το χέρι.
Το αίτημα καταχωρίστηκε
Δεν θα λάβετε τίποτα στα εισερχόμενά σας — το κατάστημα δεν στέλνει κανένα e-mail. Κάποιος το διαχειρίζεται με το χέρι.
Τον θυμηθήκατε;