PrimoChill G 1/4in 7.5mm SX Extension Coupler diy cooling
- CPU Block
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
PrimoChill
A compact G 1/4" male-to-male extension coupler with diamond-knurled coated brass body and pre-installed O-rings for custom liquid-cooling loops
Option Silver Nickel
ตัวเลือกที่ขีดฆ่าไว้มีอยู่จริง แต่ไม่มีจำหน่ายที่นี่
The PrimoChill Dual Male G1/4" Extension Coupler Mini converts a female G 1/4" thread into a male thread for custom water-cooling loops. It suits builders who need a short, rigid spacer between two female fittings or components. The diamond-knurled body provides grip for hand tightening. Buyers who want a rotating angled adapter or a longer rigid tube will not find that function here.
As a passive brass fitting the coupler adds no heat, noise or electrical draw to the loop. Its internal bore matches standard G 1/4" flow paths so restriction is negligible in normal operation. The nickel coating resists corrosion from common coolants. Installers should still pressure-test the completed loop before powering the system.
The package includes one mini coupler with two O-rings already seated in the grooves. No tools, lubricants or software are supplied. The pre-installed O-rings save assembly time and reduce the chance of missing seals during build. Candy SX finish tone may vary between knurled and smooth surfaces.
| Type | CPU Block |
|---|
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
Thread each male G 1/4in. end into the female ports of your blocks, radiators or fittings by hand, then snug gently with a wrench on the knurled section; the step many miss is confirming both pre-installed O-rings stay seated in their grooves during tightening.
The nickel-coated brass body is durable, but the two installed O-rings can degrade from coolant additives or heat cycles; plan to replace them with standard G 1/4in. O-rings during routine loop draining or if any seepage appears at the threads.
The practical limit is the O-ring seal; prolonged high temperatures or aggressive coolant chemistries can harden the elastomer, causing weepage at the male G 1/4in. threads before the coated brass body shows any fatigue.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม