Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

Replace Power

Replace Power RPSU-C95-12 400 W ATX power supply

SKU CH-1HDX-F3FSE MPN RPSU-C95-12

A 400 W ATX replacement power supply with a 20+4 pin motherboard connector, 4-pin CPU power, three SATA and two Molex peripheral connectors, and over-voltage protection

  • ColorGrey
  • TypeATX
  • Fans1
  • Weight0.1
  • 400 W output powers demanding desktop builds
  • 20+4 pin ATX connector fits 20-pin and 24-pin motherboards
  • Three SATA 15-pin connectors support multiple drives
  • Over-voltage protection guards components from power spikes
  • Compact 5.8 x 3.37 inch chassis suits tight cases

Replacement power module

The Replace Power RPSU-C95-12 is a 400 W ATX power module designed as a direct replacement for the High Power SI-A400M2 unit. It fits standard ATX layouts and uses a single fan in a grey chassis weighing 0.1 kg. The module targets repair technicians and system builders who need a drop-in spare for compatible desktop platforms.

Capacity and headroom

Rated at 400 W, the supply delivers enough power for typical office or home-office workloads including integrated graphics, multiple drives and standard peripherals. Heavy discrete GPUs, large drive arrays or sustained high-current loads on the 12 V rail will exceed its headroom. Protection circuits include output over-voltage protection plus low ripple and noise figures for stable rail delivery.

Build integration

The unit provides one 24-pin ATX (20+4) connector, one P4 12 V 4-pin connector, three SATA 15-pin connectors, two Molex 4-pin connectors and one floppy 4-pin connector. Physical dimensions are 5.8 by 3.37 units, so case clearance should be verified before installation. No modular cabling is offered; all leads are fixed. Compatibility extends to a wide range of desktop brands using the SI-A400M2 form factor.

Βασικά χαρακτηριστικά

  • 400 W output powers demanding desktop builds
  • 20+4 pin ATX connector fits 20-pin and 24-pin motherboards
  • Three SATA 15-pin connectors support multiple drives
  • Over-voltage protection guards components from power spikes
  • Compact 5.8 x 3.37 inch chassis suits tight cases

Προδιαγραφές

BrandReplace Power
ModelRPSU-C95-12
ColorGrey
TypeATX
Fans1
Weight0.1

Ερωτήσεις για αυτό το προϊόν

Will the 20+4 pin ATX and 4-pin P4 connectors on this RPSU-C95-12 fit an older motherboard that only has a 20-pin socket?

Yes, the 20+4 pin ATX connector splits so the 20-pin portion plugs directly into a 20-pin motherboard socket while the extra 4 pins hang aside, and the separate 4-pin P4-12V connector handles CPU power on boards that require it.

How can I confirm the RPSU-C95-12 is delivering stable power after installation?

The unit includes output over-voltage protection and is rated for low ripple and noise; if the system boots reliably, runs without random shutdowns and the single fan spins quietly, the supply is operating within its 400 W design limits.

Which cables come attached to the RPSU-C95-12 and what might I still need to buy?

Fixed cables provide one 20+4 pin ATX, one 4-pin P4-12V, three SATA 15-pin, two Molex 4-pin and one floppy 4-pin connector; any additional SATA, Molex or PCIe cables would need separate adapters.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.