Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Grey ATX power supply unit, rectangular metal case, single fan visible, 400 W label

Replace Power

Replace Power RPSU-C95-12 400 W ATX power supply

SKU CH-1HDX-F3FSE MPN RPSU-C95-12

A 400 W ATX replacement power supply with a 20+4 pin motherboard connector, 4-pin CPU power, three SATA and two Molex peripheral connectors, and over-voltage protection

  • ColorGrey
  • TypeATX
  • Fans1
  • Weight0.1
  • 400 W output powers demanding desktop builds
  • 20+4 pin ATX connector fits 20-pin and 24-pin motherboards
  • Three SATA 15-pin connectors support multiple drives
  • Over-voltage protection guards components from power spikes
  • Compact 5.8 x 3.37 inch chassis suits tight cases

Replacement power module

The Replace Power RPSU-C95-12 is a 400 W ATX power module designed as a direct replacement for the High Power SI-A400M2 unit. It fits standard ATX layouts and uses a single fan in a grey chassis weighing 0.1 kg. The module targets repair technicians and system builders who need a drop-in spare for compatible desktop platforms.

Capacity and headroom

Rated at 400 W, the supply delivers enough power for typical office or home-office workloads including integrated graphics, multiple drives and standard peripherals. Heavy discrete GPUs, large drive arrays or sustained high-current loads on the 12 V rail will exceed its headroom. Protection circuits include output over-voltage protection plus low ripple and noise figures for stable rail delivery.

Build integration

The unit provides one 24-pin ATX (20+4) connector, one P4 12 V 4-pin connector, three SATA 15-pin connectors, two Molex 4-pin connectors and one floppy 4-pin connector. Physical dimensions are 5.8 by 3.37 units, so case clearance should be verified before installation. No modular cabling is offered; all leads are fixed. Compatibility extends to a wide range of desktop brands using the SI-A400M2 form factor.

Kohokohdat

  • 400 W output powers demanding desktop builds
  • 20+4 pin ATX connector fits 20-pin and 24-pin motherboards
  • Three SATA 15-pin connectors support multiple drives
  • Over-voltage protection guards components from power spikes
  • Compact 5.8 x 3.37 inch chassis suits tight cases

Tekniset tiedot

BrandReplace Power
ModelRPSU-C95-12
ColorGrey
TypeATX
Fans1
Weight0.1

Kysymyksiä tästä tuotteesta

Will the 20+4 pin ATX and 4-pin P4 connectors on this RPSU-C95-12 fit an older motherboard that only has a 20-pin socket?

Yes, the 20+4 pin ATX connector splits so the 20-pin portion plugs directly into a 20-pin motherboard socket while the extra 4 pins hang aside, and the separate 4-pin P4-12V connector handles CPU power on boards that require it.

How can I confirm the RPSU-C95-12 is delivering stable power after installation?

The unit includes output over-voltage protection and is rated for low ripple and noise; if the system boots reliably, runs without random shutdowns and the single fan spins quietly, the supply is operating within its 400 W design limits.

Which cables come attached to the RPSU-C95-12 and what might I still need to buy?

Fixed cables provide one 20+4 pin ATX, one 4-pin P4-12V, three SATA 15-pin, two Molex 4-pin and one floppy 4-pin connector; any additional SATA, Molex or PCIe cables would need separate adapters.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.