BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00274649BTC
Διαθέσιμο
RIMLANCE
RIMLANCE RUD14900LD8C2K16-1 16GB (2x8GB) DDR3 1866 CL13 1.35V UDIMM 2RX8 desktop RAM
A 16 GB dual-channel DDR3 kit running at 1866 MHz with CL13 latency and low 1.35 V operation
- Capacity16GB (2 x 8GB)
- SpeedDDR3 1866 (PC3 14900)
- CAS LatencyCL13
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor Brand Chipset
- 16 GB dual-channel kit boosts multitasking headroom
- 1866 MHz DDR3 speed feeds data to the CPU faster
- CL13 latency cuts response delay for snappier apps
- 35 V low-voltage operation reduces heat and power draw
- 2Rx8 unbuffered DIMMs install straight into standard desktop slots
Kit composition
This kit provides two eight-gigabyte DDR3 modules for a total of 16GB capacity. It targets desktop owners who want more memory headroom for multitasking and heavier workloads without moving to a newer platform. The 1.35V operating voltage helps reduce power draw compared with standard 1.5V DDR3.
Thermals noise power
Unbuffered DDR3 modules at 1866MHz and 1.35V generate modest heat and run silently with no moving parts. The low voltage keeps system power draw lower than equivalent 1.5V kits while maintaining the rated CL13 timing. No active cooling is required beyond normal case airflow.
Build fit
The UDIMM form factor fits standard desktop DIMM slots and the dual-rank 2RX8 organisation works with typical consumer chipsets. Two modules leave remaining slots free for future expansion up to the motherboard limit. Installation requires no special tools or configuration beyond seating the sticks firmly.
Βασικά χαρακτηριστικά
- 16 GB dual-channel kit boosts multitasking headroom
- 1866 MHz DDR3 speed feeds data to the CPU faster
- CL13 latency cuts response delay for snappier apps
- 35 V low-voltage operation reduces heat and power draw
- 2Rx8 unbuffered DIMMs install straight into standard desktop slots
Προδιαγραφές
| Brand | RIMLANCE |
|---|---|
| Model | RUD14900LD8C2K16-1 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR3 1866 (PC3 14900) |
| CAS Latency | CL13 |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
Ερωτήσεις για αυτό το προϊόν
How do I install the 2RX8 DDR3 UDIMM modules and what step is commonly missed?
Align the notch on each 1866MHz module with the slot key, press down firmly until both side clips click, then verify in BIOS that the kit runs at 1.35V instead of the default 1.5V.
What maintenance or replacement will the 16GB DDR3 kit need later?
No routine maintenance is required; if a module fails, replace the faulty 8GB stick with another DDR3 1866 CL13 1.35V UDIMM to keep dual-channel performance.
What limit appears first when the 1866MHz DDR3 runs sustained heavy workloads?
The CL13 latency at 1.35V is the primary constraint; bandwidth and voltage are fixed, so timing ceiling limits throughput before thermal throttling occurs.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
