Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

Ruth's sister

Ruth's sister 300W Server Power Supply DPS-300AB-81B/G 20Pin 8 SATA 100-265V

SKU CH-Z5K3-C0Q4P

Delivers 300W via a 20-pin connector with eight SATA ports for compatible server chassis

  • Delivers 300W rated power for 7916NP and 7916N16P servers
  • Active PFC maintains efficient input across 100-265V range
  • Eight SATA connectors support multiple storage drives simultaneously
  • Compact 12.5*6.4*10CM form factor fits dense server chassis
  • 20-pin main connector plus 4-pin auxiliary ensures secure motherboard power

Ruth's sister 300W Server PSU

This Ruth's sister unit is a 300W server power supply built for 7916NP and 7916N16P systems. It delivers rated power between 251W and 300W through a 20Pin main connector, one 4P connector and eight SATA ports. Active PFC corrects the power factor across a 100-265V input range. The non-modular design keeps all cables fixed in a compact 12.5*6.4*10CM form factor.

Suits 7916NP/7916N16P replacement.

This supply suits technicians replacing the original DPS-300AB-81B or DPS-300AB-81G unit in compatible 7916NP and 7916N16P servers. It also fits POE deployments needing eight SATA drives from a single 300W source. Builders who require detachable cables for custom routing should look elsewhere, as the non-modular layout prevents cable reduction. Systems demanding 80 PLUS Bronze, Silver or Gold efficiency ratings are not served by the Other Certification level.

20Pin + 4P + 8 SATA connector layout decides fit

The single specification that determines compatibility is the fixed connector set: one 20Pin main, one 4P auxiliary and eight SATA power plugs. If the target backplane or drive cage uses this exact arrangement, the unit will connect directly. Any chassis needing a 24Pin ATX main connector, additional 6P or 8P PCIe plugs, or a different SATA count cannot use this supply without adapters that are not included.

Βασικά χαρακτηριστικά

  • Delivers 300W rated power for 7916NP and 7916N16P servers
  • Active PFC maintains efficient input across 100-265V range
  • Eight SATA connectors support multiple storage drives simultaneously
  • Compact 12.5*6.4*10CM form factor fits dense server chassis
  • 20-pin main connector plus 4-pin auxiliary ensures secure motherboard power

Προδιαγραφές

Δεν έχουν δημοσιευτεί ακόμη προδιαγραφές για αυτό το προϊόν.

Ερωτήσεις για αυτό το προϊόν

Which server chassis models accept the DPS-300AB-81B/G 20-pin connector?

This unit is built for the 7916NP and 7916N16P platforms that use a 20-pin main power connector.

Can the eight SATA connectors power drives in an older backplane that expects standard 5 V and 12 V rails?

Yes, each SATA connector delivers the standard 5 V and 12 V rails used by legacy drive backplanes.

How can I confirm the PSU is delivering power after installation?

The unit powers on when the server front-panel switch is pressed; drive LEDs and fan spin-up show the 300 W output is active.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.