Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular silver server PSU with 20-pin connector and eight SATA ports

Ruth's sister

Ruth's sister 300W Server Power Supply DPS-300AB-81B/G 20Pin 8 SATA 100-265V

SKU CH-Z5K3-C0Q4P

Delivers 300W via a 20-pin connector with eight SATA ports for compatible server chassis

  • Delivers 300W rated power for 7916NP and 7916N16P servers
  • Active PFC maintains efficient input across 100-265V range
  • Eight SATA connectors support multiple storage drives simultaneously
  • Compact 12.5*6.4*10CM form factor fits dense server chassis
  • 20-pin main connector plus 4-pin auxiliary ensures secure motherboard power

Ruth's sister 300W Server PSU

This Ruth's sister unit is a 300W server power supply built for 7916NP and 7916N16P systems. It delivers rated power between 251W and 300W through a 20Pin main connector, one 4P connector and eight SATA ports. Active PFC corrects the power factor across a 100-265V input range. The non-modular design keeps all cables fixed in a compact 12.5*6.4*10CM form factor.

Suits 7916NP/7916N16P replacement.

This supply suits technicians replacing the original DPS-300AB-81B or DPS-300AB-81G unit in compatible 7916NP and 7916N16P servers. It also fits POE deployments needing eight SATA drives from a single 300W source. Builders who require detachable cables for custom routing should look elsewhere, as the non-modular layout prevents cable reduction. Systems demanding 80 PLUS Bronze, Silver or Gold efficiency ratings are not served by the Other Certification level.

20Pin + 4P + 8 SATA connector layout decides fit

The single specification that determines compatibility is the fixed connector set: one 20Pin main, one 4P auxiliary and eight SATA power plugs. If the target backplane or drive cage uses this exact arrangement, the unit will connect directly. Any chassis needing a 24Pin ATX main connector, additional 6P or 8P PCIe plugs, or a different SATA count cannot use this supply without adapters that are not included.

Kohokohdat

  • Delivers 300W rated power for 7916NP and 7916N16P servers
  • Active PFC maintains efficient input across 100-265V range
  • Eight SATA connectors support multiple storage drives simultaneously
  • Compact 12.5*6.4*10CM form factor fits dense server chassis
  • 20-pin main connector plus 4-pin auxiliary ensures secure motherboard power

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

Which server chassis models accept the DPS-300AB-81B/G 20-pin connector?

This unit is built for the 7916NP and 7916N16P platforms that use a 20-pin main power connector.

Can the eight SATA connectors power drives in an older backplane that expects standard 5 V and 12 V rails?

Yes, each SATA connector delivers the standard 5 V and 12 V rails used by legacy drive backplanes.

How can I confirm the PSU is delivering power after installation?

The unit powers on when the server front-panel switch is pressed; drive LEDs and fan spin-up show the 300 W output is active.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.