Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Green circuit board with silver M.2 slot and finned aluminum heatsink

Sabrent

Sabrent EC-PCIE NVMe M.2 to PCIe x16/x8/x4 adapter with heatsink

SKU CH-WZDC-17KP8

Adds an M-key NVMe SSD in 2230, 2242, 2260 or 2280 sizes to a PCIe x16, x8 or x4 slot with an included aluminium heatsink

  • TypeM.2 port (M key) into one PCIe x4
  • External PortsM.2 (NGFF)
  • Internal PortsPCI Express x 4 via full size x 16 pinout
  • Operating Systems Supported• A computer and BIOS (usually set to AHCI) compatible with
  • Compatibility2230 / 2242 / 2260 / 2280
  • Features• Enjoy extremely fast transfer speeds via PCIe lanes. • SSD
  • Enables fast NVMe speeds via PCIe x4 lanes
  • Fits M.2 M-Key drives in 2230, 2242, 2260, 2280 sizes
  • Aluminium heatsink with thermal pad keeps SSD cool
  • Works in PCIe x16, x8 or x4 slots — not x1
  • Includes heatsink, screws and screwdriver for easy install

M.2 NVMe to PCIe x16/x8/x4 Adapter

The Sabrent EC-PCIE card lets you install an M.2 M-key NVMe solid-state drive into a full-size PCIe x16, x8 or x4 slot. It carries the drive on an aluminium heatsink with a thermal pad and ships with all mounting screws and a screwdriver.

Builders adding fast NVMe storage to a spare PCIe

This adapter suits systems that have a free x16, x8 or x4 slot and a BIOS able to boot from NVMe over PCIe lanes. It will not accept SATA M.2 drives, B-key M.2 modules or fit into a PCIe x1 slot.

Four-lane PCIe 3.0 electrical interface

The card presents a physical x16 connector but operates at x4 electrical lanes, so the installed NVMe drive communicates at its native four-lane speed. No other lane widths are supported by this adapter.

Βασικά χαρακτηριστικά

  • Enables fast NVMe speeds via PCIe x4 lanes
  • Fits M.2 M-Key drives in 2230, 2242, 2260, 2280 sizes
  • Aluminium heatsink with thermal pad keeps SSD cool
  • Works in PCIe x16, x8 or x4 slots — not x1
  • Includes heatsink, screws and screwdriver for easy install

Προδιαγραφές

BrandSABRENT
ModelEC-PCIE
TypeM.2 port (M key) into one PCIe x4
External PortsM.2 (NGFF)
Internal PortsPCI Express x 4 via full size x 16 pinout
Operating Systems Supported• A computer and BIOS (usually set to AHCI) compatible with NVMe SSD over PCIe lanes.
• Windows 7 with Microsoft’s Hotfixes for NVMe SSD.
• Windows 8 and above.
• Linux.
• If after installation you get a yellow exclamation mark under the Device Manager, you may need to get an additional driver from your SSD’s manufacturer.
Compatibility2230 / 2242 / 2260 / 2280
Features• Enjoy extremely fast transfer speeds via PCIe lanes.
• SSD Bus interface: NVMe (NOT compatible with SATA M.2 SSD).
• SSD form factor: M.2 M-Key (NOT compatible with B-Key SSD).
• PCI Express Physical interface: PCIe x16/x8/x4 slot. Logical Interface / PCIe Lanes: X4.
• Compatible Sizes: 2230 / 2242 / 2260 / 2280.
• NOTE: It will not fit the PCIe x1 slot.
• All necessary screws are included.
Package Contents• NVMeM.2 SSD To PCIe x16/x8/x4 Card (SSD is NOT included).
• Heatsink with thermal pad.
• All necessary screws.
Βάρος αποστολής0.08 kg
Διαστάσεις συσκευασίας102 × 51 × 13 mm

Ερωτήσεις για αυτό το προϊόν

What PCIe lane limit applies when the Sabrent EC-PCIE adapter runs at full speed?

The adapter provides a PCIe x4 logical interface, so the SSD is limited to four lanes regardless of the x16, x8 or x4 slot used.

Does the aluminium heatsink keep the drive cool enough for all-day workloads?

The included aluminium heatsink with thermal pad dissipates heat from the M.2 NVMe SSD during sustained operation.

Which motherboard slot and BIOS setting are required for the card to function?

A full-size PCIe x16, x8 or x4 slot and a BIOS configured for NVMe over PCIe lanes (usually AHCI mode) are required.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.