NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.
SAMSUNG
32 GB DDR4-2933 ECC registered dual-rank module with CL21 latency for stable server workloads
This module delivers 32GB of DDR4-2933 memory with CL21 latency in a registered dual-rank design. The onboard register reduces electrical load on the memory controller, allowing stable operation when multiple modules are populated. It targets workstations and servers that require error-correcting code protection for data integrity.
The registered architecture buffers address and command signals, which lowers the per-module load on the memory bus and helps maintain signal integrity at higher population counts. Dual-rank organisation increases density per slot, so fewer modules are needed to reach large system capacities. Standard 288-pin DIMM form factor fits desktop and server boards that support registered ECC memory.
On-die error-correcting code detects and corrects single-bit errors, reducing the risk of silent data corruption in critical workloads. Samsung’s DDR4 process delivers doubled bandwidth with reduced voltage compared with earlier generations, improving performance per watt. Enhanced RAS features further strengthen reliability and signal integrity for continuous operation.
| Brand | SAMSUNG |
|---|---|
| Capacity | 32GB |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
The module is rated for DDR4-2933 at CL21; the memory controller must support that speed and the registered design, otherwise it will down-clock to the highest JEDEC speed the platform allows.
It uses the standard DDR4 288-pin RDIMM form factor, so it physically fits any desktop DDR4 slot, but the motherboard must support registered ECC memory or the module will not be recognised.
Power off, open the retention clips, align the notch with the key, press firmly until both clips click, then enable ECC and registered mode in BIOS — skipping the BIOS step is the common mistake.
Επίσης σε αυτό το ράφι
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
Το νόμισμα στο οποίο πληρώνετε, και αυτό στο οποίο βλέπετε τις τιμές.
Αποστέλλεται από το πορτοφόλι σας στο ταμείο
Μόνο για προβολή — ο κατάλογος αναγράφεται σε δολάρια
Κανένα νόμισμα δεν αντιστοιχεί.
Επιλέξτε τη γλώσσα στην οποία σας μιλάει ο ιστότοπος.
Πρώτη επίσκεψη;
Έχετε ήδη λογαριασμό;
Δεν υπάρχει αυτόματη επαναφορά κωδικού: αυτό το κατάστημα δεν στέλνει e-mail, άρα δεν υπάρχει σύνδεσμος μίας χρήσης να ζητήσετε. Αφήστε τη διεύθυνση στον λογαριασμό σας και κάποιος θα την επεξεργαστεί με το χέρι.
Το αίτημα καταχωρίστηκε
Δεν θα λάβετε τίποτα στα εισερχόμενά σας — το κατάστημα δεν στέλνει κανένα e-mail. Κάποιος το διαχειρίζεται με το χέρι.
Τον θυμηθήκατε;