Silver 2.5 inch 15 mm SATA hard drive with label ST2000NX0253

Seagate

Seagate Enterprise ST2000NX0253 2 TB 2.5" 7200 RPM 15 mm SATA internal hard drive

SKU CH-WC4T-C8YKJ

A 2.5 inch 2 TB SATA hard drive spinning at 7200 RPM in a 15 mm z-height for space-constrained servers

2 TB capacity stores large datasets
7200 RPM spindle delivers fast data access
16 ms average latency reduces wait times
SATA 6 Gbps interface enables 600 Mbps transfers
15 mm z-height fits 2.5" SFF server bays

111,99 $

0.00142613 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες 39,90 $
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Προσθέστε 287,01 $ ακόμη και η βασική αποστολή γίνεται δωρεάν.

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

Enterprise Storage for Servers

The Seagate Enterprise ST2000NX0253 is a 2 TB internal hard drive built for servers that accept a 2.5 inch 15 mm SATA drive. It spins at 7200 RPM with an average latency of 4.16 ms to serve data in demanding environments.

Fits 2.5 Inch 15 mm Bays

This drive slides into any server bay designed for a 2.5 inch by 15 mm SATA device. The SATA 6 Gbps interface connects directly to the backplane without an adapter. Its 600 Mbps transfer rate keeps the bus saturated during sustained reads and writes.

Upgrades Slower or Smaller Drives

Replacing a lower-capacity or lower-RPM 2.5 inch SATA drive adds 2000 GB of space and reduces latency to 4.16 ms. The jump is worth it when your workload needs both higher throughput and the 15 mm height allowance.

Βασικά χαρακτηριστικά

2 TB capacity stores large datasets
7200 RPM spindle delivers fast data access
16 ms average latency reduces wait times
SATA 6 Gbps interface enables 600 Mbps transfers
15 mm z-height fits 2.5" SFF server bays

Προδιαγραφές

Δεν έχουν δημοσιευτεί ακόμη προδιαγραφές για αυτό το προϊόν.

Ερωτήσεις για αυτό το προϊόν

Does the 7200 RPM speed create a thermal or noise limit during sustained writes?

The 15 mm height and 7200 RPM spindle fit standard 2.5-inch bays; average latency is 4.16 ms and the SATA 6 Gbps interface handles 600 Mbps, so the drive operates within typical enterprise thermal and acoustic envelopes.

What is the steady-state power draw once the drive has been spinning all day?

The SATA 6 Gbps interface runs at 600 Mbps and the 7200 RPM motor maintains 4.16 ms average latency; power consumption stays within the standard 2.5-inch enterprise SATA envelope for continuous operation.

Which controller or backplane must my server already have for this 2.5-inch 15 mm SATA drive to work?

Any server or storage enclosure that accepts a 2.5-inch 15 mm SFF SATA drive with a standard SATA 6 Gbps connector will support this 2 TB model without additional hardware.

Επίσης σε αυτό το ράφι