Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Silver 2.5 inch 15 mm SATA hard drive with label ST2000NX0253

Seagate

Seagate Enterprise ST2000NX0253 2 TB 2.5" 7200 RPM 15 mm SATA internal hard drive

SKU CH-WC4T-C8YKJ

A 2.5 inch 2 TB SATA hard drive spinning at 7200 RPM in a 15 mm z-height for space-constrained servers

  • 2 TB capacity stores large datasets
  • 7200 RPM spindle delivers fast data access
  • 16 ms average latency reduces wait times
  • SATA 6 Gbps interface enables 600 Mbps transfers
  • 15 mm z-height fits 2.5" SFF server bays

Enterprise Storage for Servers

The Seagate Enterprise ST2000NX0253 is a 2 TB internal hard drive built for servers that accept a 2.5 inch 15 mm SATA drive. It spins at 7200 RPM with an average latency of 4.16 ms to serve data in demanding environments.

Fits 2.5 Inch 15 mm Bays

This drive slides into any server bay designed for a 2.5 inch by 15 mm SATA device. The SATA 6 Gbps interface connects directly to the backplane without an adapter. Its 600 Mbps transfer rate keeps the bus saturated during sustained reads and writes.

Upgrades Slower or Smaller Drives

Replacing a lower-capacity or lower-RPM 2.5 inch SATA drive adds 2000 GB of space and reduces latency to 4.16 ms. The jump is worth it when your workload needs both higher throughput and the 15 mm height allowance.

Přednosti

  • 2 TB capacity stores large datasets
  • 7200 RPM spindle delivers fast data access
  • 16 ms average latency reduces wait times
  • SATA 6 Gbps interface enables 600 Mbps transfers
  • 15 mm z-height fits 2.5" SFF server bays

Specifikace

Pro tento produkt zatím nejsou zveřejněny žádné specifikace.

Otázky k tomuto produktu

Does the 7200 RPM speed create a thermal or noise limit during sustained writes?

The 15 mm height and 7200 RPM spindle fit standard 2.5-inch bays; average latency is 4.16 ms and the SATA 6 Gbps interface handles 600 Mbps, so the drive operates within typical enterprise thermal and acoustic envelopes.

What is the steady-state power draw once the drive has been spinning all day?

The SATA 6 Gbps interface runs at 600 Mbps and the 7200 RPM motor maintains 4.16 ms average latency; power consumption stays within the standard 2.5-inch enterprise SATA envelope for continuous operation.

Which controller or backplane must my server already have for this 2.5-inch 15 mm SATA drive to work?

Any server or storage enclosure that accepts a 2.5-inch 15 mm SFF SATA drive with a standard SATA 6 Gbps connector will support this 2 TB model without additional hardware.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.