Seagate

Seagate Exos X20 ST18000NM003D 18TB 7200 RPM 256MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive

SKU CH-7913-M1K0G

High-capacity 18TB 3.5-inch drive spinning at 7200 RPM with 256MB cache and SATA 6.0Gb/s interface for enterprise storage

InterfaceSATA 6.0Gb/s
Capacity18TB
Recording TechnologyCMR
RPM7200 RPM
Cache256MB
Average Latency4.16ms

18TB capacity stores massive datasets in a single 3.5" bay
7200 RPM spindle delivers 4.16ms average latency for fast access
256MB cache accelerates sustained read and write workloads
SATA 6.0Gb/s interface integrates directly into existing enterprise arrays
CMR recording technology ensures consistent performance for cloud-scale storage

459,99 $

0.00599601 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες Δωρεάν
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

Seagate Exos X20 18TB enterprise drive

The Seagate Exos X20 ST18000NM003D is a 3.5 inch internal hard drive with an 18TB capacity. It operates at 7200 RPM with a 256MB cache and connects via a SATA 6.0Gb/s interface. This CMR drive is built for enterprise storage environments.

Suited for high-capacity enterprise arrays

This drive suits data centres and cloud deployments that need maximum terabytes per rack with proven reliability. It is not for buyers who need the low latency of solid-state storage, nor for systems that lack a 3.5 inch bay and SATA power and data connections.

SATA 6.0Gb/s interface and 3.5 inch form factor

The drive uses the SATA 6.0Gb/s interface and a standard 3.5 inch form factor measuring 147.00mm long, 101.85mm wide and 26.10mm high. Verify that your chassis, backplane and controller support this physical size and SATA connection before purchase.

Βασικά χαρακτηριστικά

18TB capacity stores massive datasets in a single 3.5" bay
7200 RPM spindle delivers 4.16ms average latency for fast access
256MB cache accelerates sustained read and write workloads
SATA 6.0Gb/s interface integrates directly into existing enterprise arrays
CMR recording technology ensures consistent performance for cloud-scale storage

Προδιαγραφές

Brand	Seagate
Series	Exos X20
Model	ST18000NM003D
Interface	SATA 6.0Gb/s
Capacity	18TB
Recording Technology	CMR
RPM	7200 RPM
Cache	256MB
Average Latency	4.16ms
Features	Market-leading 20TB HDD offering the highest capacity available for more petabytes per rack* Highly reliable performance with enhanced caching, making it the logical choice for cloud data center and massive scale-out data center applications Hyperscale SATA model tuned for large data transfers and low latency PowerBalance feature optimizes Watts/TB Maximize total cost of ownership savings through lower power and weight with helium sealed-drive design Proven helium side-sealing weld technology for added handling robustness and leak protection Digital environmental sensors to monitor i
Usage	For Enterprise Storage
Form Factor	3.5"
Height (maximum)	26.10mm
Width (maximum)	101.85mm
Length (maximum)	147.00mm

Ερωτήσεις για αυτό το προϊόν

Will the 3.5" 7200 RPM Exos X20 work in my existing SATA 6.0Gb/s bay alongside older drives?

Yes, the ST18000NM003D uses the standard SATA 6.0Gb/s interface and 3.5-inch form factor, so it fits the same bays and cables as earlier SATA drives.

How can I verify the 18TB CMR drive is healthy after installation?

Check that the BIOS or OS reports the full 18000 GB capacity, run a SMART short self-test and confirm the drive spins at 7200 RPM with no reallocated sectors.

Does the 256MB cache Exos X20 ship with mounting screws and a SATA data cable?

The drive is supplied as a bare unit; mounting screws and a SATA data cable are not included and must be sourced separately.

Επίσης σε αυτό το ράφι