Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Silver 3.5 inch bare SATA hard drive with circuit board visible

Seagate

Seagate ST4000NM0024 4TB 7200 RPM SATA 6.0Gb/s 128MB 3.5" internal hard drive

SKU CH-HYT2-92Q71 MPN ST4000NM0024

4 TB 3.5" SATA 6.0 Gb/s enterprise drive with 7200 RPM, 128 MB cache and 550 TB/yr workload rating

  • PackagingBare Drive
  • InterfaceSATA 6.0Gb/s
  • Capacity4TB
  • RPM7200 RPM
  • Cache128MB
  • Average Latency4.16ms
  • 4TB capacity stores large datasets
  • 7200 RPM delivers fast sequential throughput
  • 128MB cache accelerates random access
  • SATA 6.0Gb/s interface ensures broad compatibility
  • Engineered for 550TB/yr workloads in 24x7 RAID arrays

Capacity and purpose

The Seagate ST4000NM0024 provides 4TB of storage on a 3.5" SATA 6.0Gb/s interface. It spins at 7200 RPM with a 128MB cache for fast sequential and random access. The drive is engineered for enterprise workloads of 550TB per year.

Build and connectors

The bare drive uses a standard SATA data and power connector layout compatible with desktop drive bays and hot-swap trays. Multi-drive firmware is optimised for RAID environments to maintain array availability. Rotational vibration safeguards help sustain performance in multi-bay chassis.

Thermals noise and power

The 7200 RPM spindle and enterprise-grade motor are rated for continuous 24x7 operation. Average latency is specified at 4.16ms. The design targets sustained throughput under heavy load rather than idle acoustics.

Βασικά χαρακτηριστικά

  • 4TB capacity stores large datasets
  • 7200 RPM delivers fast sequential throughput
  • 128MB cache accelerates random access
  • SATA 6.0Gb/s interface ensures broad compatibility
  • Engineered for 550TB/yr workloads in 24x7 RAID arrays

Προδιαγραφές

BrandSeagate
ModelST4000NM0024
PackagingBare Drive
InterfaceSATA 6.0Gb/s
Capacity4TB
RPM7200 RPM
Cache128MB
Average Latency4.16ms
FeaturesFastest high-capacity HDD with best-in-class random and sequential read/write performance.
Eighth-generation drive technology for reliable access to bulk storage of unstructured data.
Industry-leading rotational vibration tolerance ensures consistent performance.
Improved power and cooling efficiencies with low power consumption and on-demand PowerChoice technology based on T10/T13 power management standards.
Engineered for 24x7 workloads of 550TB/yr-10x that of desktop drives.
Robust performance with dual processors, ramp load technology, top-coverattached motor and humidity sensor
UsageFor Enterprise Storage
Form Factor3.5"
Βάρος αποστολής0.69 kg
Διαστάσεις συσκευασίας170 × 124 × 36 mm

Ερωτήσεις για αυτό το προϊόν

What real-world throughput does the SATA 6.0Gb/s interface deliver on this drive?

The SATA 6.0Gb/s link caps at 6.0Gb/s; actual sustained rates depend on the 7200 RPM platters and 128MB cache.

Will the 3.5" form factor fit my standard desktop drive bay and SATA connectors?

Yes, the 3.5" form factor matches standard desktop bays and uses the same SATA data and power connectors.

How do I install the bare drive in a RAID array, and what firmware step is often missed?

Mount the drive in a 3.5" bay, connect SATA data and power cables, then ensure the RAID controller loads the enterprise firmware tuned for 550TB/yr workloads.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.